This patch is part of a series which unifies all duplicated code between
omap730 and omap850. All cpu checks are converted to cpu_is_omap7xx() and
CONFIG_ARCH_OMAP850 is added to all CONFIG_ARCH_OMAP730 checks.

This file had no omap850 specific code. Initial clock support was done in
the Linwizard tree by Zebediah C. McClure.

Signed-off-by: Alistair Buxton <[email protected]>
Reviewed-by: Zebediah C. McClure <[email protected]>
---
 arch/arm/mach-omap1/clock.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 436eed2..fcbea61 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk *
clk, unsigned long rate)
         * Reprogramming the DPLL is tricky, it must be done from SRAM.
         * (on 730, bit 13 must always be 1)
         */
-       if (cpu_is_omap730())
+       if (cpu_is_omap7xx())
                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 
0x2000);
        else
                omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
@@ -783,7 +783,7 @@ int __init omap1_clk_init(void)
                cpu_mask |= CK_16XX;
        if (cpu_is_omap1510())
                cpu_mask |= CK_1510;
-       if (cpu_is_omap730())
+       if (cpu_is_omap7xx())
                cpu_mask |= CK_730;
        if (cpu_is_omap310())
                cpu_mask |= CK_310;
@@ -800,7 +800,7 @@ int __init omap1_clk_init(void)
                        crystal_type = info->system_clock_type;
        }

-#if defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
        ck_ref.rate = 13000000;
 #elif defined(CONFIG_ARCH_OMAP16XX)
        if (crystal_type == 2)
@@ -847,7 +847,7 @@ int __init omap1_clk_init(void)
                printk(KERN_ERR "System frequencies not set. Check your 
config.\n");
                /* Guess sane values (60MHz) */
                omap_writew(0x2290, DPLL_CTL);
-               omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
+               omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
                ck_dpll1.rate = 60000000;
        }
 #endif
@@ -873,7 +873,7 @@ int __init omap1_clk_init(void)

        /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
        /* (on 730, bit 13 must not be cleared) */
-       if (cpu_is_omap730())
+       if (cpu_is_omap7xx())
                omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
        else
                omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-- 
1.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to