Stick to the names used in the reference manual
Signed-off-by: Amit Kucheria <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
drivers/mfd/twl4030-power.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index d423e0c..82e3bcb 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -69,12 +69,12 @@ static u8 twl4030_start_script_address = 0x2b;
/* resource configuration registers */
-#define DEVGROUP_OFFSET 0
+#define DEV_GRP_OFFSET 0
#define TYPE_OFFSET 1
-/* Bit positions */
-#define DEVGROUP_SHIFT 5
-#define DEVGROUP_MASK (7 << DEVGROUP_SHIFT)
+/* Bit positions in the registers */
+#define DEV_GRP_SHIFT 5
+#define DEV_GRP_MASK (7 << DEV_GRP_SHIFT)
#define TYPE_SHIFT 0
#define TYPE_MASK (7 << TYPE_SHIFT)
#define TYPE2_SHIFT 3
@@ -328,7 +328,7 @@ static int __init twl4030_configure_resource(struct
twl4030_resconfig *rconfig)
/* Set resource group */
err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
- rconfig_addr + DEVGROUP_OFFSET);
+ rconfig_addr + DEV_GRP_OFFSET);
if (err) {
pr_err("TWL4030 Resource %d group could not be read\n",
rconfig->resource);
@@ -336,10 +336,10 @@ static int __init twl4030_configure_resource(struct
twl4030_resconfig *rconfig)
}
if (rconfig->devgroup >= 0) {
- grp &= ~DEVGROUP_MASK;
- grp |= rconfig->devgroup << DEVGROUP_SHIFT;
+ grp &= ~DEV_GRP_MASK;
+ grp |= rconfig->devgroup << DEV_GRP_SHIFT;
err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- grp, rconfig_addr + DEVGROUP_OFFSET);
+ grp, rconfig_addr + DEV_GRP_OFFSET);
if (err < 0) {
pr_err("TWL4030 failed to program devgroup\n");
return err;
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
