Hi Ameya, The issue that I'm talking about is:
<3>HS USB OTG: no transceiver configured <3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19 Actually I'm running usb tests. At the moment of boot my zoom3 I had this issue. Taking the suggestion of Vikram the issue was solved. Regards Maldonado Zambrano, Ivan [email protected] Project L23x3630. -----Original Message----- From: Ameya Palande [mailto:[email protected]] Sent: Monday, October 19, 2009 12:29 PM To: Maldonado Zambrano, Ivan Cc: Janosch Machowinski; [email protected] Subject: Re: stable kernel version Hi, Does this commit fixes the issue? [v2] usb: musb: Warn and check for OTG transceiver misconfiguration Warn if OTG is selected in Kconfig but not initialized by platform code. Add checks to prevent NULL pointer exception in case the OTG transceiver has not been initialized. i.e. musb->xceiv == NULL Signed-off-by: Roger Quadros <[email protected]> --- drivers/usb/musb/musb_core.c | 7 ++++++- drivers/usb/musb/omap2430.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) Link: http://patchwork.kernel.org/patch/32914/ Cheers, Ameya. On Mon, Oct 19, 2009 at 8:19 PM, Maldonado Zambrano, Ivan <[email protected]> wrote: > Hi Machowinski, > > Enabling TWL4030 USB Transceiver Driver on your menuconfig the issue that you > mentioned on a log file attached on previous mails is corrected. I had the > same problem. Like an introduction, my name is Ivan Maldonado Zambrano and > I'm working on USB tests for zoom3 and sdp. Attached my log file, if you > compare with yours is the same problem. > > Regards > Maldonado Zambrano, Ivan > [email protected] > Project L23x3630. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Janosch Machowinski > Sent: Monday, October 19, 2009 11:32 AM > To: [email protected] > Subject: Re: stable kernel version > > Pandita, Vikram schrieb: >> Here's the problem: >> <3>HS USB OTG: no transceiver configured >> <3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19 >> >> Depending on your board, you will have to define the transceiver for MUSB. >> It could be TWL4030 or NO-transceiver... >> > I got an Gumstix Overo Earth so which one would it be then ? > > I tried one kernel, with only NOOP, > and one with all three options enabled, > same result any time (crash). >> Drivers -> USB -> (last options) *** OTG and related infrastructure *** >> >> Or do u want to disable USB to start with !! >> > Actually USB is the feature why I started compiling a new kernel > in the fist place ;-) > > > Regards > Janosch > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
