> -----Original Message----- > From: linux-omap-ow...@vger.kernel.org > [mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of > tero.kri...@nokia.com > Sent: Monday, October 19, 2009 5:19 AM > > Anyway, I guess the optimization would look something like this: > > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c > index 210a806..7a98321 100644 > --- a/arch/arm/mach-omap2/pm34xx.c > +++ b/arch/arm/mach-omap2/pm34xx.c > @@ -93,6 +93,8 @@ u32 voltage_off_while_idle; > OMAP3430_ST_GPT5_MASK|OMAP3430_ST_GPT4_MASK|\ > OMAP3430_ST_GPT3_MASK|OMAP3430_ST_GPT2_MASK) > > +#define INTC_SYSCONFIG 0x10 > + > struct power_state { > struct powerdomain *pwrdm; > u32 next_state; > @@ -505,6 +507,12 @@ void omap_sram_idle(void) > prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); > omap3_enable_io_chain(); > } > + /* > + * Disable INTC autoidle as it can cause interrupt controller > + * to enter unknown state with right combination of sleep / wakeup > + * transitions > + */ > + omap_writel(0x0, OMAP34XX_IC_BASE + INTC_SYSCONFIG); > > /* > * On EMU/HS devices ROM code restores a SRDC value > @@ -561,6 +569,8 @@ void omap_sram_idle(void) > OMAP3430_GR_MOD, > OMAP3_PRM_VOLTCTRL_OFFSET); > } > + /* Re-enable interrupt controller autoidle */ > + omap_writel(OMAP3430_AUTOIDLE, OMAP34XX_IC_BASE + INTC_SYSCONFIG); > > /* > * Enable smartreflex after WFI. Only needed if we
Ack from me. -Girish > -- > 1.5.4.3-- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
