From: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com>

This patch removes the check to see if some functional clocks are
still enabled before entering sleep.  This is no longer needed when
using safe state (C1) that keeps CORE active.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrij...@nokia.com>
Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c |   42 ------------------------------------------
 1 files changed, 0 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 35c917e..40cbba4 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -461,54 +461,12 @@ void omap_sram_idle(void)
        omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
-/*
- * Check if functional clocks are enabled before entering
- * sleep. This function could be behind CONFIG_PM_DEBUG
- * when all drivers are configuring their sysconfig registers
- * properly and using their clocks properly.
- */
-static int omap3_fclks_active(void)
-{
-       u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
-               fck_cam = 0, fck_per = 0, fck_usbhost = 0;
-
-       fck_core1 = cm_read_mod_reg(CORE_MOD,
-                                   CM_FCLKEN1);
-       if (omap_rev() > OMAP3430_REV_ES1_0) {
-               fck_core3 = cm_read_mod_reg(CORE_MOD,
-                                           OMAP3430ES2_CM_FCLKEN3);
-               fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-                                         CM_FCLKEN);
-               fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-                                             CM_FCLKEN);
-       } else
-               fck_sgx = cm_read_mod_reg(GFX_MOD,
-                                         OMAP3430ES2_CM_FCLKEN3);
-       fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
-                                 CM_FCLKEN);
-       fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
-                                 CM_FCLKEN);
-       fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
-                                 CM_FCLKEN);
-
-       /* Ignore UART clocks.  These are handled by UART core (serial.c) */
-       fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
-       fck_per &= ~OMAP3430_EN_UART3;
-
-       if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
-           fck_cam | fck_per | fck_usbhost)
-               return 1;
-       return 0;
-}
-
 int omap3_can_sleep(void)
 {
        if (!sleep_while_idle)
                return 0;
        if (!omap_uart_can_sleep())
                return 0;
-       if (omap3_fclks_active())
-               return 0;
        return 1;
 }
 
-- 
1.6.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to