Replace zoom2 with zoom name in board-zoom-peripherals.c file This file has functions reused for boards: Zoom2/Zoom3/sdp3630. Hence have all functions commonly named as zoom
Signed-off-by: Vikram Pandita <[email protected]> --- arch/arm/mach-omap2/board-zoom-peripherals.c | 70 +++++++++++++------------- 1 files changed, 35 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 1bb4a8a..4ca9c20 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -87,27 +87,27 @@ static struct matrix_keymap_data board_map_data = { .keymap_size = ARRAY_SIZE(board_keymap), }; -static struct twl4030_keypad_data zoom2_kp_twl4030_data = { +static struct twl4030_keypad_data zoom_kp_twl4030_data = { .keymap_data = &board_map_data, .rows = 8, .cols = 8, .rep = 1, }; -static struct regulator_consumer_supply zoom2_vmmc1_supply = { +static struct regulator_consumer_supply zoom_vmmc1_supply = { .supply = "vmmc", }; -static struct regulator_consumer_supply zoom2_vsim_supply = { +static struct regulator_consumer_supply zoom_vsim_supply = { .supply = "vmmc_aux", }; -static struct regulator_consumer_supply zoom2_vmmc2_supply = { +static struct regulator_consumer_supply zoom_vmmc2_supply = { .supply = "vmmc", }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data zoom2_vmmc1 = { +static struct regulator_init_data zoom_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -118,11 +118,11 @@ static struct regulator_init_data zoom2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc1_supply, + .consumer_supplies = &zoom_vmmc1_supply, }; /* VMMC2 for MMC2 card */ -static struct regulator_init_data zoom2_vmmc2 = { +static struct regulator_init_data zoom_vmmc2 = { .constraints = { .min_uV = 1850000, .max_uV = 1850000, @@ -133,11 +133,11 @@ static struct regulator_init_data zoom2_vmmc2 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc2_supply, + .consumer_supplies = &zoom_vmmc2_supply, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data zoom2_vsim = { +static struct regulator_init_data zoom_vsim = { .constraints = { .min_uV = 1800000, .max_uV = 3000000, @@ -148,7 +148,7 @@ static struct regulator_init_data zoom2_vsim = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vsim_supply, + .consumer_supplies = &zoom_vsim_supply, }; static struct twl4030_hsmmc_info mmc[] __initdata = { @@ -165,7 +165,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static int zoom2_twl_gpio_setup(struct device *dev, +static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ), @@ -178,15 +178,15 @@ static int zoom2_twl_gpio_setup(struct device *dev, /* link regulators to MMC adapters ... we "know" the * regulators will be set up only *after* we return. */ - zoom2_vmmc1_supply.dev = mmc[0].dev; - zoom2_vsim_supply.dev = mmc[0].dev; - zoom2_vmmc2_supply.dev = mmc[1].dev; + zoom_vmmc1_supply.dev = mmc[0].dev; + zoom_vsim_supply.dev = mmc[0].dev; + zoom_vmmc2_supply.dev = mmc[1].dev; return 0; } -static int zoom2_batt_table[] = { +static int zoom_batt_table[] = { /* 0 C*/ 30800, 29500, 28300, 27100, 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, @@ -197,55 +197,55 @@ static int zoom2_batt_table[] = { 4040, 3910, 3790, 3670, 3550 }; -static struct twl4030_bci_platform_data zoom2_bci_data = { - .battery_tmp_tbl = zoom2_batt_table, - .tblsize = ARRAY_SIZE(zoom2_batt_table), +static struct twl4030_bci_platform_data zoom_bci_data = { + .battery_tmp_tbl = zoom_batt_table, + .tblsize = ARRAY_SIZE(zoom_batt_table), }; -static struct twl4030_usb_data zoom2_usb_data = { +static struct twl4030_usb_data zoom_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_gpio_platform_data zoom2_gpio_data = { +static struct twl4030_gpio_platform_data zoom_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, - .setup = zoom2_twl_gpio_setup, + .setup = zoom_twl_gpio_setup, }; -static struct twl4030_madc_platform_data zoom2_madc_data = { +static struct twl4030_madc_platform_data zoom_madc_data = { .irq_line = 1, }; -static struct twl4030_platform_data zoom2_twldata = { +static struct twl4030_platform_data zoom_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .bci = &zoom2_bci_data, - .madc = &zoom2_madc_data, - .usb = &zoom2_usb_data, - .gpio = &zoom2_gpio_data, - .keypad = &zoom2_kp_twl4030_data, - .vmmc1 = &zoom2_vmmc1, - .vmmc2 = &zoom2_vmmc2, - .vsim = &zoom2_vsim, + .bci = &zoom_bci_data, + .madc = &zoom_madc_data, + .usb = &zoom_usb_data, + .gpio = &zoom_gpio_data, + .keypad = &zoom_kp_twl4030_data, + .vmmc1 = &zoom_vmmc1, + .vmmc2 = &zoom_vmmc2, + .vsim = &zoom_vsim, }; -static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { +static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { { I2C_BOARD_INFO("twl4030", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom2_twldata, + .platform_data = &zoom_twldata, }, }; static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, - ARRAY_SIZE(zoom2_i2c_boardinfo)); + omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo, + ARRAY_SIZE(zoom_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; -- 1.6.5.1.69.g36942 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
