Tero Kristo <[email protected]> writes:
> From: Tero Kristo <[email protected]>
>
> It is suggested by TI (SWPA152 February 2009) to write clksetup,
> voltsetup_time1, voltsetup_time2, voltsetup2 dynamically in idle loop.
>
> This allows us to optimize the voltage + clock setup times according to the
> used power save mode.
>
> Signed-off-by: Tero Kristo <[email protected]>
This one needs a refresh against current PM branch, in particular, Rajendra's
changes to the PRM setup code were merged and conflict with this.
Kevin
> ---
> arch/arm/mach-omap2/pm.h | 10 ++++-
> arch/arm/mach-omap2/pm34xx.c | 86
> ++++++++++++++++++++++++------------------
> 2 files changed, 57 insertions(+), 39 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index f8d11a2..b384eb1 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -24,12 +24,18 @@ extern int omap3_can_sleep(void);
> extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
> extern int omap3_idle_init(void);
>
> -struct prm_setup_vc {
> +struct prm_setup_times_vc {
> u16 clksetup;
> u16 voltsetup_time1;
> u16 voltsetup_time2;
> - u16 voltoffset;
> u16 voltsetup2;
> + u16 voltsetup1;
> +};
> +
> +struct prm_setup_vc {
> + struct prm_setup_times_vc *setup_times;
> + struct prm_setup_times_vc *setup_times_off;
> + u16 voltoffset;
> /* PRM_VC_CMD_VAL_0 specific bits */
> u16 vdd0_on;
> u16 vdd0_onlp;
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 154cd31..5eb7321 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -82,12 +82,17 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
> static struct powerdomain *core_pwrdm, *per_pwrdm;
> static struct powerdomain *cam_pwrdm;
>
> -static struct prm_setup_vc prm_setup = {
> +static struct prm_setup_times_vc prm_setup_times_default = {
> .clksetup = 0xff,
> .voltsetup_time1 = 0xfff,
> .voltsetup_time2 = 0xfff,
> - .voltoffset = 0xff,
> .voltsetup2 = 0xff,
> +};
> +
> +static struct prm_setup_vc prm_setup_default = {
> + .setup_times = &prm_setup_times_default,
> + .setup_times_off = NULL,
> + .voltoffset = 0xff,
> .vdd0_on = 0x30, /* 1.2v */
> .vdd0_onlp = 0x20, /* 1.0v */
> .vdd0_ret = 0x1e, /* 0.975v */
> @@ -98,6 +103,8 @@ static struct prm_setup_vc prm_setup = {
> .vdd1_off = 0x00, /* 0.6v */
> };
>
> +static struct prm_setup_vc *prm_setup = &prm_setup_default;
> +
> static inline void omap3_per_save_context(void)
> {
> omap3_gpio_save_context();
> @@ -338,6 +345,16 @@ static void restore_table_entry(void)
> restore_control_register(control_reg_value);
> }
>
> +static void prm_program_setup_times(struct prm_setup_times_vc *times)
> +{
> + prm_write_mod_reg(times->voltsetup1, OMAP3430_GR_MOD,
> + OMAP3_PRM_VOLTSETUP1_OFFSET);
> + prm_write_mod_reg(times->voltsetup2, OMAP3430_GR_MOD,
> + OMAP3_PRM_VOLTSETUP2_OFFSET);
> + prm_write_mod_reg(times->clksetup, OMAP3430_GR_MOD,
> + OMAP3_PRM_CLKSETUP_OFFSET);
> +}
> +
> void omap_sram_idle(void)
> {
> /* Variable to tell what needs to be saved and restored
> @@ -422,6 +439,9 @@ void omap_sram_idle(void)
> OMAP3_PRM_VOLTCTRL_OFFSET);
> omap3_core_save_context();
> omap3_prcm_save_context();
> + if (prm_setup->setup_times_off != NULL)
> + prm_program_setup_times(prm_setup->
> + setup_times_off);
> } else if (core_next_state == PWRDM_POWER_RET) {
> prm_set_mod_reg_bits(OMAP3430_AUTO_RET,
> OMAP3430_GR_MOD,
> @@ -479,11 +499,13 @@ void omap_sram_idle(void)
> }
> omap_uart_resume_idle(0);
> omap_uart_resume_idle(1);
> - if (core_next_state == PWRDM_POWER_OFF)
> + if (core_next_state == PWRDM_POWER_OFF) {
> prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
> OMAP3430_GR_MOD,
> OMAP3_PRM_VOLTCTRL_OFFSET);
> - else if (core_next_state == PWRDM_POWER_RET)
> + if (prm_setup->setup_times_off != NULL)
> + prm_program_setup_times(prm_setup->setup_times);
> + } else if (core_next_state == PWRDM_POWER_RET)
> prm_clear_mod_reg_bits(OMAP3430_AUTO_RET,
> OMAP3430_GR_MOD,
> OMAP3_PRM_VOLTCTRL_OFFSET);
> @@ -1043,21 +1065,19 @@ int omap3_pm_set_suspend_state(struct powerdomain
> *pwrdm, int state)
> return -EINVAL;
> }
>
> +static void omap3_init_prm_setup_times(struct prm_setup_times_vc *conf)
> +{
> + if (conf == NULL)
> + return;
> +
> + conf->voltsetup1 =
> + (conf->voltsetup_time2 << OMAP3430_SETUP_TIME2_SHIFT) |
> + (conf->voltsetup_time1 << OMAP3430_SETUP_TIME1_SHIFT);
> +}
> +
> void omap3_set_prm_setup_vc(struct prm_setup_vc *setup_vc)
> {
> - prm_setup.clksetup = setup_vc->clksetup;
> - prm_setup.voltsetup_time1 = setup_vc->voltsetup_time1;
> - prm_setup.voltsetup_time2 = setup_vc->voltsetup_time2;
> - prm_setup.voltoffset = setup_vc->voltoffset;
> - prm_setup.voltsetup2 = setup_vc->voltsetup2;
> - prm_setup.vdd0_on = setup_vc->vdd0_on;
> - prm_setup.vdd0_onlp = setup_vc->vdd0_onlp;
> - prm_setup.vdd0_ret = setup_vc->vdd0_ret;
> - prm_setup.vdd0_off = setup_vc->vdd0_off;
> - prm_setup.vdd1_on = setup_vc->vdd1_on;
> - prm_setup.vdd1_onlp = setup_vc->vdd1_onlp;
> - prm_setup.vdd1_ret = setup_vc->vdd1_ret;
> - prm_setup.vdd1_off = setup_vc->vdd1_off;
> + prm_setup = setup_vc;
> }
>
> static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
> @@ -1204,16 +1224,16 @@ static void __init configure_vc(void)
> (R_VDD1_SR_CONTROL << OMAP3430_VOLRA0_SHIFT),
> OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET);
>
> - prm_write_mod_reg((prm_setup.vdd0_on << OMAP3430_VC_CMD_ON_SHIFT) |
> - (prm_setup.vdd0_onlp << OMAP3430_VC_CMD_ONLP_SHIFT) |
> - (prm_setup.vdd0_ret << OMAP3430_VC_CMD_RET_SHIFT) |
> - (prm_setup.vdd0_off << OMAP3430_VC_CMD_OFF_SHIFT),
> + prm_write_mod_reg((prm_setup->vdd0_on << OMAP3430_VC_CMD_ON_SHIFT) |
> + (prm_setup->vdd0_onlp << OMAP3430_VC_CMD_ONLP_SHIFT) |
> + (prm_setup->vdd0_ret << OMAP3430_VC_CMD_RET_SHIFT) |
> + (prm_setup->vdd0_off << OMAP3430_VC_CMD_OFF_SHIFT),
> OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
>
> - prm_write_mod_reg((prm_setup.vdd1_on << OMAP3430_VC_CMD_ON_SHIFT) |
> - (prm_setup.vdd1_onlp << OMAP3430_VC_CMD_ONLP_SHIFT) |
> - (prm_setup.vdd1_ret << OMAP3430_VC_CMD_RET_SHIFT) |
> - (prm_setup.vdd1_off << OMAP3430_VC_CMD_OFF_SHIFT),
> + prm_write_mod_reg((prm_setup->vdd1_on << OMAP3430_VC_CMD_ON_SHIFT) |
> + (prm_setup->vdd1_onlp << OMAP3430_VC_CMD_ONLP_SHIFT) |
> + (prm_setup->vdd1_ret << OMAP3430_VC_CMD_RET_SHIFT) |
> + (prm_setup->vdd1_off << OMAP3430_VC_CMD_OFF_SHIFT),
> OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
>
> prm_write_mod_reg(OMAP3430_CMD1 | OMAP3430_RAV1, OMAP3430_GR_MOD,
> @@ -1224,19 +1244,11 @@ static void __init configure_vc(void)
> OMAP3_PRM_VC_I2C_CFG_OFFSET);
>
> /* Write setup times */
> - prm_write_mod_reg(prm_setup.clksetup, OMAP3430_GR_MOD,
> - OMAP3_PRM_CLKSETUP_OFFSET);
> - prm_write_mod_reg((prm_setup.voltsetup_time2 <<
> - OMAP3430_SETUP_TIME2_SHIFT) |
> - (prm_setup.voltsetup_time1 <<
> - OMAP3430_SETUP_TIME1_SHIFT),
> - OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
> -
> - prm_write_mod_reg(prm_setup.voltoffset, OMAP3430_GR_MOD,
> + omap3_init_prm_setup_times(prm_setup->setup_times);
> + omap3_init_prm_setup_times(prm_setup->setup_times_off);
> + prm_program_setup_times(prm_setup->setup_times);
> + prm_write_mod_reg(prm_setup->voltoffset, OMAP3430_GR_MOD,
> OMAP3_PRM_VOLTOFFSET_OFFSET);
> - prm_write_mod_reg(prm_setup.voltsetup2, OMAP3430_GR_MOD,
> - OMAP3_PRM_VOLTSETUP2_OFFSET);
> -
> pm_dbg_regset_init(1);
> pm_dbg_regset_init(2);
> }
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
