* Vimal Singh <[email protected]> [091110 02:08]:
> From 42f080e0915bbce1509fc8ab3773569fec0a44f1 Mon Sep 17 00:00:00 2001
> From: Vimal Singh <[email protected]>
> Date: Tue, 10 Nov 2009 11:39:39 +0530
> Subject: [PATCH] OMAP2/3: Add support for flash on SDP boards
>
> Add support for flash on SDP boards. NAND, NOR and OneNAND
> are supported.
>
> Only tested on 3430SDP (ES2 and ES3.1), somebody please test on
> 2430SDP and check the chips select for 2430SDP.
>
> Also note that:
> For OneNAND: in the earlier 2430SDP code the kernel partition
> was set to only 1MB instead of 2MB on 3430SDP. If people want
> the old partition sizes back on 2430SDP, please provide a patch.
>
> For NAND: 'U-Boot', 'Boot Env' and 'Kernel' partitions sizes increased
> by few blocks to provide few spare blocks for NAND bab block management
> in u-boot. If people want old partition sizes, please provide a patch.
>
> Signed-off-by: Vimal Singh <[email protected]>
> Cc: Tony Lindgren <[email protected]>
> ---
> arch/arm/mach-omap2/Makefile | 2 +
> arch/arm/mach-omap2/board-2430sdp.c | 2 +
> arch/arm/mach-omap2/board-3430sdp.c | 2 +
> arch/arm/mach-omap2/board-sdp-flash.c | 326
> +++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/board-sdp.h | 15 ++
> arch/arm/plat-omap/include/plat/gpmc.h | 2 +
> 6 files changed, 349 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-sdp-flash.c
> create mode 100644 arch/arm/plat-omap/include/plat/board-sdp.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 03cb4fc..627f500 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
> obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
> obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
> obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
> + board-sdp-flash.o \
> mmc-twl4030.o
> obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
> obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
> @@ -66,6 +67,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
> obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
> mmc-twl4030.o
> obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
> + board-sdp-flash.o \
> mmc-twl4030.o
> obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
> obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c
> b/arch/arm/mach-omap2/board-2430sdp.c
> index db9374b..5676ab9 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -38,6 +38,7 @@
> #include <plat/usb.h>
> #include <plat/gpmc-smc91x.h>
>
> +#include <plat/board-sdp.h>
> #include "mmc-twl4030.h"
>
> #define SDP2430_CS0_BASE 0x04000000
> @@ -205,6 +206,7 @@ static void __init omap_2430sdp_init(void)
> twl4030_mmc_init(mmc);
> usb_musb_init();
> board_smc91x_init();
> + sdp_flash_init();
>
> /* Turn off secondary LCD backlight */
> ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
> diff --git a/arch/arm/mach-omap2/board-3430sdp.c
> b/arch/arm/mach-omap2/board-3430sdp.c
> index a3c1271..4497ded 100644
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -41,6 +41,7 @@
> #include <plat/control.h>
> #include <plat/gpmc-smc91x.h>
>
> +#include <plat/board-sdp.h>
> #include "sdram-qimonda-hyb18m512160af-6.h"
> #include "mmc-twl4030.h"
>
> @@ -511,6 +512,7 @@ static void __init omap_3430sdp_init(void)
> omap_serial_init();
> usb_musb_init();
> board_smc91x_init();
> + sdp_flash_init();
> enable_board_wakeup_source();
> usb_ehci_init(&ehci_pdata);
> }
> diff --git a/arch/arm/mach-omap2/board-sdp-flash.c
> b/arch/arm/mach-omap2/board-sdp-flash.c
> new file mode 100644
> index 0000000..c881772
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-sdp-flash.c
> @@ -0,0 +1,326 @@
> +/*
> + * arch/arm/mach-omap2/board-sdp-flash.c
> + *
> + * Copyright (C) 2009 Nokia Corporation
> + * Copyright (C) 2007 Texas Instruments
> + *
> + * Modified from mach-omap2/board-3430sdp-flash.c
> + * Author: Vimal Singh <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/io.h>
> +
> +#include <asm/mach/flash.h>
> +#include <plat/onenand.h>
> +#include <plat/gpmc.h>
> +#include <plat/nand.h>
> +
> +#define REG_FPGA_REV 0x10
> +#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
> +#define MAX_SUPPORTED_GPMC_CONFIG 3
> +
> +/* various memory sizes */
> +#define FLASH_SIZE_SDPV1 SZ_64M
> +#define FLASH_SIZE_SDPV2 SZ_128M
> +
> +#define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (64 Meg aligned) */
> +#define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (256 Meg aligned) */
> +
> +#define DEBUG_BASE 0x08000000 /* debug board */
> +
> +#define PDC_NOR 1
> +#define PDC_NAND 2
> +#define PDC_ONENAND 3
> +#define DBG_MPDB 4
> +
> +/*
> + * SDP3430 V2 Board CS organization
> + * Different from SDP3430 V1. Now 4 switches used to specify CS
> + *
> + * See also the Switch S8 settings in the comments.
> + *
> + * REVISIT: Add support for 2430 SDP
> + */
> +static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
> + {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
> + {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
> + {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
> +};
> +
> +static struct mtd_partition sdp_nor_partitions[] = {
> + /* bootloader (U-Boot, etc) in first sector */
> + {
> + .name = "Bootloader-NOR",
> + .offset = 0,
> + .size = SZ_256K,
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + /* bootloader params in the next sector */
> + {
> + .name = "Params-NOR",
> + .offset = MTDPART_OFS_APPEND,
> + .size = SZ_256K,
> + .mask_flags = 0,
> + },
> + /* kernel */
> + {
> + .name = "Kernel-NOR",
> + .offset = MTDPART_OFS_APPEND,
> + .size = SZ_2M,
> + .mask_flags = 0
> + },
> + /* file system */
> + {
> + .name = "Filesystem-NOR",
> + .offset = MTDPART_OFS_APPEND,
> + .size = MTDPART_SIZ_FULL,
> + .mask_flags = 0
> + }
> +};
> +
> +static struct flash_platform_data sdp_nor_data = {
> + .map_name = "cfi_probe",
> + .width = 2,
> + .parts = sdp_nor_partitions,
> + .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
> +};
> +
> +static struct resource sdp_nor_resource = {
> + .start = 0,
> + .end = 0,
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct platform_device sdp_nor_device = {
> + .name = "omapflash",
> + .id = 0,
> + .dev = {
> + .platform_data = &sdp_nor_data,
> + },
> + .num_resources = 1,
> + .resource = &sdp_nor_resource,
> +};
> +
> +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
> + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
> +
> +static struct mtd_partition board_onenand_partitions[] = {
> + {
> + .name = "X-Loader-OneNAND",
> + .offset = 0,
> + .size = 4 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE /* force read-only */
> + },
> + {
> + .name = "U-Boot-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 2 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE /* force read-only */
> + },
> + {
> + .name = "U-Boot Environment-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 1 * (64 * 2048),
> + },
> + {
> + .name = "Kernel-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = 16 * (64 * 2048),
> + },
> + {
> + .name = "File System-OneNAND",
> + .offset = MTDPART_OFS_APPEND,
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct omap_onenand_platform_data board_onenand_data = {
> + .parts = board_onenand_partitions,
> + .nr_parts = ARRAY_SIZE(board_onenand_partitions),
> + .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
> +};
> +
> +
> +static void __init board_onenand_init(u8 cs)
> +{
> + board_onenand_data.cs = cs;
> + gpmc_onenand_init(&board_onenand_data);
> +}
> +
> +#else
> +
> +static inline void board_onenand_init(u8 cs)
> +{
> +}
> +#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
> +
> +static struct mtd_partition sdp_nand_partitions[] = {
> + /* All the partition sizes are listed in terms of NAND block size */
> + {
> + .name = "X-Loader-NAND",
> + .offset = 0,
> + .size = 4 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "U-Boot-NAND",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
> + .size = 10 * (64 * 2048),
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "Boot Env-NAND",
> +
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
> + .size = 6 * (64 * 2048),
> + },
> + {
> + .name = "Kernel-NAND",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
> + .size = 40 * (64 * 2048),
> + },
> + {
> + .name = "File System - NAND",
> + .size = MTDPART_SIZ_FULL,
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
> + },
> +};
> +
> +static struct omap_nand_platform_data sdp_nand_data = {
> + .parts = sdp_nand_partitions,
> + .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
> + .nand_setup = NULL,
> + .dma_channel = -1, /* disable DMA in OMAP NAND driver */
> + .dev_ready = NULL,
> +};
> +
> +static struct resource sdp_nand_resource = {
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct platform_device sdp_nand_device = {
> + .name = "omap2-nand",
> + .id = 0,
> + .dev = {
> + .platform_data = &sdp_nand_data,
> + },
> + .num_resources = 1,
> + .resource = &sdp_nand_resource,
> +};
> +
> +void board_nand_init(u8 cs)
> +{
> + sdp_nand_data.cs = cs;
> + sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
> + GPMC_CS0_BASE + cs * GPMC_CS_SIZE);
> + sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
> +
> + if (platform_device_register(&sdp_nand_device) < 0)
> + printk(KERN_ERR "Unable to register NAND device\n");
> +}
> +
> +/**
> + * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
> + * the various cs values.
> + */
> +static u8 get_gpmc0_type(void)
> +{
> + u8 cs;
> + void __iomem *fpga_map_addr;
> +
> + fpga_map_addr = ioremap(DEBUG_BASE, 4096);
> + if (!fpga_map_addr)
> + return -ENOMEM;
> +
> + if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
> + /* we dont have an DEBUG FPGA??? */
> + /* Depend on #defines!! default to strata boot return param */
> + return 0x0;
Should iounmap before returning, or goto unmap.
> + /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
> + cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
> +
> + /* ES2.0 SDP's onwards 4 dip switches are provided for CS */
> + if (omap_rev() >= OMAP3430_REV_ES1_0)
> + /* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
> + cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
> + ((cs & 2) << 1) | ((cs & 1) << 3);
> + else
> + /* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
> + cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
> +
> + iounmap(fpga_map_addr);
> + return cs;
> +}
> +
> +/**
> + * sdp3430_flash_init - Identify devices connected to GPMC and register.
> + *
> + * @return - void.
> + */
> +void __init sdp_flash_init(void)
> +{
> + u8 cs = 0;
> + u8 nandcs = GPMC_CS_NUM + 1;
> + u8 onenandcs = GPMC_CS_NUM + 1;
> + u8 idx;
> + unsigned char *config_sel = NULL;
> +
> + /* REVISIT: Is this return correct idx for 2430 SDP?
> + * for which cs configuration matches for 2430 SDP?
> + */
> + idx = get_gpmc0_type();
> + if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
> + printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
> + return;
> + }
> + config_sel = (unsigned char *)(chip_sel_sdp[idx]);
> +
> + /* Configure start address and size of NOR device */
> + if (omap_rev() >= OMAP3430_REV_ES1_0) {
> + sdp_nor_resource.start = FLASH_BASE_SDPV2;
> + sdp_nor_resource.end = FLASH_BASE_SDPV2
> + + FLASH_SIZE_SDPV2 - 1;
> + } else {
> + sdp_nor_resource.start = FLASH_BASE_SDPV1;
> + sdp_nor_resource.end = FLASH_BASE_SDPV1
> + + FLASH_SIZE_SDPV1 - 1;
> + }
This should be done with gpmc_cs_request using the chip select and size.
Please see gpmc_smc91x_init() for an example.
> + if (platform_device_register(&sdp_nor_device) < 0)
> + printk(KERN_ERR "Unable to register NOR device\n");
> +
> + while (cs < GPMC_CS_NUM) {
> + switch (config_sel[cs]) {
> + case PDC_NAND:
> + if (nandcs > GPMC_CS_NUM)
> + nandcs = cs;
> + break;
> + case PDC_ONENAND:
> + if (onenandcs > GPMC_CS_NUM)
> + onenandcs = cs;
> + break;
> + };
> + cs++;
> + }
> +
> + if (onenandcs > GPMC_CS_NUM)
> + printk(KERN_INFO "OneNAND: Unable to find configuration "
> + " in GPMC\n ");
> + else
> + board_onenand_init(onenandcs);
> +
> + if (nandcs > GPMC_CS_NUM)
> + printk(KERN_INFO "NAND: Unable to find configuration "
> + " in GPMC\n ");
> + else
> + board_nand_init(nandcs);
> +}
> diff --git a/arch/arm/plat-omap/include/plat/board-sdp.h
> b/arch/arm/plat-omap/include/plat/board-sdp.h
> new file mode 100644
> index 0000000..632f21a
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/plat/board-sdp.h
> @@ -0,0 +1,15 @@
> +/*
> + * arch/arm/plat-omap/include/plat/board-sdp.h
> + *
> + * Information structures for SDP-specific board config data
> + *
> + * Copyright (C) 2009 Nokia Corporation
> + * Copyright (C) 2009 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +extern void sdp_flash_init(void);
> +
> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h
> b/arch/arm/plat-omap/include/plat/gpmc.h
> index 9c99cda..c752ab7 100644
> --- a/arch/arm/plat-omap/include/plat/gpmc.h
> +++ b/arch/arm/plat-omap/include/plat/gpmc.h
> @@ -27,6 +27,8 @@
>
> #define GPMC_CONFIG 0x50
> #define GPMC_STATUS 0x54
> +#define GPMC_CS0_BASE 0x60
> +#define GPMC_CS_SIZE 0x30
>
> #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
> #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
> --
> 1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
