> -----Original Message----- > From: Hiremath, Vaibhav > Sent: Thursday, November 26, 2009 10:41 AM > To: [email protected] > Cc: [email protected]; Hiremath, Vaibhav > Subject: [PATCH V2] AM3517: Add support for TSC2004 driver > > From: Vaibhav Hiremath <[email protected]> > > Changes: > - Removed omap_cfg_reg() > > Reviewed-by: Tony Lindgren <[email protected]> > Signed-off-by: Vaibhav Hiremath <[email protected]> > --- > arch/arm/mach-omap2/board-am3517evm.c | 61 > +++++++++++++++++++++++++++++++++ > 1 files changed, 61 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach- > omap2/board-am3517evm.c > index 415a13d..b183d93 100644 > --- a/arch/arm/mach-omap2/board-am3517evm.c > +++ b/arch/arm/mach-omap2/board-am3517evm.c > @@ -20,6 +20,8 @@ > #include <linux/init.h> > #include <linux/platform_device.h> > #include <linux/gpio.h> > +#include <linux/irq.h> > +#include <linux/i2c/tsc2004.h> > > #include <mach/hardware.h> > #include <asm/mach-types.h> > @@ -27,10 +29,64 @@ > #include <asm/mach/map.h> > > #include <plat/board.h> > +#include <plat/mux.h> > #include <plat/common.h> > #include <plat/usb.h> > > /* > + * TSC 2004 Support > + */ > +#define GPIO_TSC2004_IRQ 65 > + > +static int tsc2004_init_irq(void) > +{ > + int ret = 0; > + > + ret = gpio_request(GPIO_TSC2004_IRQ, "tsc2004-irq"); > + if (ret < 0) { > + printk(KERN_WARNING "failed to request GPIO#%d: %d\n", > + GPIO_TSC2004_IRQ, ret); > + return ret; > + } > + > + if (gpio_direction_input(GPIO_TSC2004_IRQ)) { > + printk(KERN_WARNING "GPIO#%d cannot be configured as " > + "input\n", GPIO_TSC2004_IRQ); > + return -ENXIO; > + } > + > + omap_set_gpio_debounce(GPIO_TSC2004_IRQ, 1); > + omap_set_gpio_debounce_time(GPIO_TSC2004_IRQ, 0xa); > + return ret; > +} > + > +static void tsc2004_exit_irq(void) > +{ > + gpio_free(GPIO_TSC2004_IRQ); > +} > + > +static int tsc2004_get_irq_level(void) > +{ > + return gpio_get_value(GPIO_TSC2004_IRQ) ? 0 : 1; > +} > + > +struct tsc2004_platform_data am3517evm_tsc2004data = { > + .model = 2004, > + .x_plate_ohms = 180, > + .get_pendown_state = tsc2004_get_irq_level, > + .init_platform_hw = tsc2004_init_irq, > + .exit_platform_hw = tsc2004_exit_irq, > +}; > + > +static struct i2c_board_info __initdata > am3517evm_tsc_i2c_boardinfo[] = { > + { > + I2C_BOARD_INFO("tsc2004", 0x4B), > + .type = "tsc2004", > + .platform_data = &am3517evm_tsc2004data, > + }, > +}; > + > +/* > * Board initialization > */ > static struct omap_board_config_kernel am3517_evm_config[] > __initdata = { > @@ -67,6 +123,11 @@ static void __init am3517_evm_init(void) > > omap_serial_init(); > usb_ehci_init(&ehci_pdata); > + > + /* TSC 2004 */ > + am3517evm_tsc_i2c_boardinfo[0].irq = > gpio_to_irq(GPIO_TSC2004_IRQ); > + i2c_register_board_info(1, am3517evm_tsc_i2c_boardinfo, > + ARRAY_SIZE(am3517evm_tsc_i2c_boardinfo)); > } > > static void __init am3517_evm_map_io(void) [Hiremath, Vaibhav] Hi Tony,
Since I haven't received any comments on driver code it should get merged. But I am not sure what the procedure is for input subsystem drivers? Is it happens through linux-omap or linux-input? Thanks, Vaibhav > -- > 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
