> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -2167,21 +2167,163 @@ static int __devexit musb_remove(struct
> platform_device *pdev)
>
> #ifdef CONFIG_PM
>
> +static struct musb_context_registers musb_context;
> +
> +void musb_save_context(void __iomem *musb_base)
> +{
> + int i;
> +
> + musb_context.faddr = musb_readb(musb_base, MUSB_FADDR);
> + musb_context.power = musb_readb(musb_base, MUSB_POWER);
> + musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
> + musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
> + musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
> + musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
Not necessary for gadget
> + musb_context.index = musb_readb(musb_base, MUSB_INDEX);
> + musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
Not sure if it is necessary for gadget.
> + musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
> +
> + for (i = 0; i < MUSB_C_NUM_EPS; ++i) {
> + musb_writeb(musb_base, MUSB_INDEX, i);
> + musb_context.index_regs[i].txmaxp =
> + musb_readw(musb_base, 0x10 + MUSB_TXMAXP);
> + musb_context.index_regs[i].txcsr =
> + musb_readw(musb_base, 0x10 + MUSB_TXCSR);
> + musb_context.index_regs[i].rxmaxp =
> + musb_readw(musb_base, 0x10 + MUSB_RXMAXP);
> + musb_context.index_regs[i].rxcsr =
> + musb_readw(musb_base, 0x10 + MUSB_RXCSR);
> + musb_context.index_regs[i].rxcount =
> + musb_readw(musb_base, 0x10 + MUSB_RXCOUNT);
> + musb_context.index_regs[i].txtype =
> + musb_readb(musb_base, 0x10 + MUSB_TXTYPE);
> + musb_context.index_regs[i].txinterval =
> + musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL);
> + musb_context.index_regs[i].rxtype =
> + musb_readb(musb_base, 0x10 + MUSB_RXTYPE);
> + musb_context.index_regs[i].rxinterval =
> + musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL);
> +
> + musb_context.index_regs[i].txfifoadd =
> + musb_read_txfifoadd(musb_base);
> + musb_context.index_regs[i].rxfifoadd =
> + musb_read_rxfifoadd(musb_base);
> + musb_context.index_regs[i].txfifosz =
> + musb_read_txfifosz(musb_base);
> + musb_context.index_regs[i].rxfifosz =
> + musb_read_rxfifosz(musb_base);
If MUSB_CONFIGDATA_DYNFIFO is not set then saving FIFO address and sizes are
probably not necessary. Not sure if they are detrimental as well.
> +
> + musb_context.index_regs[i].txfunaddr =
> + musb_read_txfunaddr(musb_base, i);
> + musb_context.index_regs[i].txhubaddr =
> + musb_read_txhubaddr(musb_base, i);
> + musb_context.index_regs[i].txhubport =
> + musb_read_txhubport(musb_base, i);
> +
> + musb_context.index_regs[i].rxfunaddr =
> + musb_read_rxfunaddr(musb_base, i);
> + musb_context.index_regs[i].rxhubaddr =
> + musb_read_rxhubaddr(musb_base, i);
> + musb_context.index_regs[i].rxhubport =
> + musb_read_rxhubport(musb_base, i);
> + }
If we are in gadget mode, do we have to save this?
> +
> + musb_writeb(musb_base, MUSB_INDEX, musb_context.index);
> +
> + musb_platform_save_context(&musb_context);
> +}
Similar for restore.
> static int musb_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> unsigned long flags;
> struct musb *musb = dev_to_musb(&pdev->dev);
> + u8 reg;
>
> if (!musb->clock)
> return 0;
>
> spin_lock_irqsave(&musb->lock, flags);
>
> + musb_save_context(musb->mregs);
> +
> if (is_peripheral_active(musb)) {
> - /* FIXME force disconnect unless we know USB will wake
> - * the system up quickly enough to respond ...
> + /* System is entering into suspend where gadget would not be
> + * able to respond to host and thus it will be in an unknown
> + * state for host.Re-enumemation of gadget is required after
> + * resume to make the gadget functional thus doing a force
> + * disconnect.
> */
> + reg = musb_readb(musb->mregs, MUSB_POWER);
> + reg &= ~MUSB_POWER_SOFTCONN;
> + musb_writeb(musb->mregs, MUSB_POWER, reg);
After this softdisconnect when we subsequently get reconnected followed by a
reset we could have changed our speed (LS,FS, HS). In your resume routine we are
writing back our previous speed. I am not sure here but is it not possible that
we have reset the controller and then restored back the old speed overwriting
the new speed?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
