* Cory Maccarrone <[email protected]> [091206 20:48]:
> This change implements the clocks, platform driver, and register
> information necessary to use the spi100k bus with OMAP 7xx systems.
>
> The clocks added are dummy clocks because, although we're pretty
> sure there are clocks used for SPI, all current booting methods result
> in proper operation without the enabling of any other clocks.
>
> Signed-off-by: Cory Maccarrone <[email protected]>
> ---
> arch/arm/mach-omap1/clock.c | 4 ++
> arch/arm/mach-omap1/devices.c | 70
> +++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/plat/omap7xx.h | 3 +
> arch/arm/plat-omap/include/plat/spi100k.h | 15 ++++++
> 4 files changed, 92 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/plat-omap/include/plat/spi100k.h
>
> diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
> index dc8ca91..e584c0f 100644
> --- a/arch/arm/mach-omap1/clock.c
> +++ b/arch/arm/mach-omap1/clock.c
> @@ -135,6 +135,10 @@ static struct omap_clk omap_clks[] = {
> CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 |
> CK_310 | CK_7XX),
> CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
> CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 |
> CK_7XX),
> + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
> + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
> + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
> + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX),
> CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 |
> CK_310),
> CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
> CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
> diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
> index 23ded2d..9f1c1cc 100644
> --- a/arch/arm/mach-omap1/devices.c
> +++ b/arch/arm/mach-omap1/devices.c
> @@ -24,6 +24,12 @@
> #include <mach/gpio.h>
> #include <plat/mmc.h>
>
> +#if defined(CONFIG_SPI_OMAP_100K)
> +#include <plat/omap7xx.h>
> +#include <plat/spi100k.h>
> +#include <linux/spi/spi.h>
> +#endif
> +
Please don't ifdef includes, you should be able to include them even
if the driver is not selected.
> /*-------------------------------------------------------------------------*/
>
> #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
> @@ -196,6 +202,69 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data
> **mmc_data,
>
> /*-------------------------------------------------------------------------*/
>
> +/* OMAP7xx SPI support */
> +#if defined(CONFIG_SPI_OMAP_100K)
> +
> +#include <plat/omap7xx.h>
> +#include <plat/spi100k.h>
> +#include <linux/spi/spi.h>
> +
> +static struct omap_spi100k_platform_config omap_spi1_config = {
> + .num_cs = 2,
> +};
> +
> +static struct resource omap_spi1_resources[] = {
> + {
> + .start = OMAP7XX_SPI1_BASE,
> + .end = OMAP7XX_SPI1_BASE + 0x7ff,
> + .flags = IORESOURCE_MEM,
> + },
> +};
> +
> +struct platform_device omap_spi1 = {
> + .name = "omap1_spi100k",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(omap_spi1_resources),
> + .resource = omap_spi1_resources,
> + .dev = {
> + .platform_data = &omap_spi1_config,
> + },
> +};
> +
> +static struct omap_spi100k_platform_config omap_spi2_config = {
> + .num_cs = 2,
> +};
> +
> +static struct resource omap_spi2_resources[] = {
> + {
> + .start = OMAP7XX_SPI2_BASE,
> + .end = OMAP7XX_SPI2_BASE + 0x7ff,
> + .flags = IORESOURCE_MEM,
> + },
> +};
> +
> +struct platform_device omap_spi2 = {
> + .name = "omap1_spi100k",
> + .id = 2,
> + .num_resources = ARRAY_SIZE(omap_spi2_resources),
> + .resource = omap_spi2_resources,
> + .dev = {
> + .platform_data = &omap_spi2_config,
> + },
> +};
> +
> +static void omap_init_spi100k(void)
> +{
> + platform_device_register(&omap_spi1);
> + platform_device_register(&omap_spi2);
> +}
> +
> +#else
> +static inline void omap_init_spi100k(void) {}
> +#endif
Here you can do the ioremap I mentioned in the comments for
the driver patch.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
