Kevin Hilman had written, on 12/09/2009 05:15 PM, the following:
Tero Kristo <[email protected]> writes:

From: Tero Kristo <[email protected]>

Current warning messages will be constantly printed out during normal operation
if smartreflex autocompensation is disabled.

Signed-off-by: Tero Kristo <[email protected]>

Agreed that these warnings are spam, but I think they should be
replaced by some one-time warning so at least there's a hint someplace
that SR is not actually being done on a platfrom.

is'nt that already taken care?
echo -n 1 >/sys/power/vdd1_autocomp; echo $?
should return a non 0 value if it was not set, else should set 0 if it went ok.

if someone wants to verify the state, it should be a cat /sys/power/vdd1_autocomp to know if autocomp was set or not.

For some userspace to know if autocomp was set or not (if I understand your intention) should look at return value like normal linux commands.


Kevin

---
 arch/arm/mach-omap2/smartreflex.c |   10 +---------
 1 files changed, 1 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex.c 
b/arch/arm/mach-omap2/smartreflex.c
index be3a1da..db228b2 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -675,13 +675,8 @@ void sr_start_vddautocomap(int srid, u32 target_opp_no)
                sr_configure(sr);
        }
- if (sr->is_autocomp_active == 1)
-               pr_warning("SR%d: VDD autocomp is already active\n",
-                                                                       srid);
-
        sr->is_autocomp_active = 1;
        if (!sr_enable(sr, target_opp_no)) {
-               pr_warning("SR%d: VDD autocomp not activated\n", srid);
                sr->is_autocomp_active = 0;
                if (sr->is_sr_reset == 1)
                        sr_clk_disable(sr);
@@ -707,11 +702,8 @@ int sr_stop_vddautocomap(int srid)
                /* Reset the volatage for current OPP */
                sr_reset_voltage(srid);
                return true;
-       } else {
-               pr_warning("SR%d: VDD autocomp is not active\n",
-                                                               srid);
+       } else
                return false;
-       }
}
 EXPORT_SYMBOL(sr_stop_vddautocomap);
--
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to