* Daniel Toussaint <[email protected]> [091210 12:24]: > Dear All, > > See attached patch for this board: > http://www.technexion.com/index.php/thunder > The patch contains board file, support for an LCD panel under DSS2 > and support for Alsa sound.
Cool. Can you please split the the patches into following separate patches: 1. Add minimal board support 2. Add defconfig 3. Add ASoC support 4. Add DSS2 support Then please run all the patches through scripts/checkpatch.pl --strict and fix the errors and warnings. And please make sure things keep compiling through the all the patches, otherwise git bisect will break. Cheers, Tony > /Signed-off-by Daniel Toussaint <[email protected]> > > > /// > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 16c0c13..e5493a5 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -151,6 +151,11 @@ config MACH_OMAP_4430SDP > bool "OMAP 4430 SDP board" > depends on ARCH_OMAP4 > > +config MACH_OMAP3_THUNDER > + bool "Thunder OMAP3530 board" > + depends on ARCH_OMAP3 && ARCH_OMAP34XX > + select OMAP_PACKAGE_CUS > + > config OMAP3_EMU > bool "OMAP3 debugging peripherals" > depends on ARCH_OMAP3 > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index 0c5d886..bd76499 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += > board-4430sdp.o > > obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o > > +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ > + mmc-twl4030.o > + > # Platform specific device init code > obj-y += usb-musb.o > obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o > diff --git a/arch/arm/mach-omap2/board-omap3thunder.c > b/arch/arm/mach-omap2/board-omap3thunder.c > new file mode 100644 > index 0000000..d6ea9de > --- /dev/null > +++ b/arch/arm/mach-omap2/board-omap3thunder.c > @@ -0,0 +1,647 @@ > +/* > + * linux/arch/arm/mach-omap2/board-omap3touchbook.c > + * > + * Copyright (C) 2009 Technexion > + * > + * Modified from mach-omap2/board-omap3beagleboard.c > + * > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > + > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/io.h> > +#include <linux/leds.h> > +#include <linux/gpio.h> > +#include <linux/input.h> > +#include <linux/gpio_keys.h> > + > +#include <linux/mtd/mtd.h> > +#include <linux/mtd/partitions.h> > +#include <linux/mtd/nand.h> > + > +#include <linux/regulator/machine.h> > +#include <linux/i2c/twl4030.h> > + > +#include <mach/hardware.h> > +#include <asm/mach-types.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > +#include <asm/mach/flash.h> > + > +#include <plat/board.h> > +#include <plat/usb.h> > +#include <linux/usb/otg.h> > +#include <plat/common.h> > +#include <plat/gpmc.h> > +#include <plat/nand.h> > +#include <plat/mux.h> > +#include <plat/display.h> > + > +#include "mmc-twl4030.h" > +#include "mux.h" > + > + > +#include <linux/spi/spi.h> > +#include <linux/spi/ads7846.h> > +#include <plat/mcspi.h> > + > +#include <plat/mmc.h> > + > + > +#define OMAP3_THUNDER_TS_GPIO 136 > + > +#define GPMC_CS0_BASE 0x60 > +#define GPMC_CS_SIZE 0x30 > + > +#define NAND_BLOCK_SIZE SZ_128K > + > +#define THUNDER_DVI_PANEL_EN_GPIO 199 /* GPIO 7 on TWL4030 */ > +#define THUNDER_LCD_PANEL_ENVDD 138 > +#define THUNDER_LCD_PON 139 > + > +#define TWL_INTBR_GPBR1 0x0c > +#define TWL_INTBR_PMBR1 0x0d > +#define TWL_PWM0_ON 0x00 > +#define TWL_PWM0_OFF 0x01 > + > +static int lcd_enabled; > +static int dvi_enabled; > + > +static void __init thunder_display_init(void) > +{ > + gpio_request(THUNDER_LCD_PANEL_ENVDD, "lcd_panel_envdd"); > + gpio_request(THUNDER_LCD_PON, "lcd_panel_pon"); > + gpio_direction_output(THUNDER_LCD_PON, 1); > + gpio_direction_output(THUNDER_LCD_PANEL_ENVDD, 0); > + return; > +} > + > +static int thunder_enable_lcd(struct omap_dss_device *dssdev) > +{ > + > + if (dvi_enabled) { > + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); > + return -EINVAL; > + } > + > + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 0); > + gpio_set_value(THUNDER_LCD_PON, 1); > + > + /* This turns on the backlight, move this to backlight code later */ > + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 0x81, TWL_PWM0_ON); > + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x04, TWL_INTBR_PMBR1); > + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 40 , TWL_PWM0_OFF); > + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x05, TWL_INTBR_GPBR1); > + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 50 , TWL_PWM0_OFF); > + /* End of turning on Backlight */ > + > + lcd_enabled = 1; > + return 0; > +} > + > +static void thunder_disable_lcd(struct omap_dss_device *dssdev) > +{ > + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 1); > + gpio_set_value(THUNDER_LCD_PON, 0); > + lcd_enabled = 0; > +} > + > + > +static int thunder_set_backlight ( struct omap_dss_device *dssdev, int > level) > +{ > + return 0; > +} > + > +static int thunder_get_backlight ( struct omap_dss_device *dssdev) > +{ > + return 10; > +} > + > + > +static struct omap_dss_device thunder_lcd_device = { > + .type = OMAP_DISPLAY_TYPE_DPI, > + .name = "lcd", > + .driver_name = "panel-lg-lb043wq2", > + .phy.dpi.data_lines = 24, > + .platform_enable = thunder_enable_lcd, > + .platform_disable = thunder_disable_lcd, > + > + .get_backlight = thunder_get_backlight, > + .set_backlight = thunder_set_backlight, > + .max_backlight_level = 100, > +}; > + > +static int thunder_enable_dvi(struct omap_dss_device *dssdev) > +{ > + if (lcd_enabled) { > + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); > + return -EINVAL; > + } > + > + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 1); > + dvi_enabled = 1; > + > + return 0; > +} > + > +static void thunder_disable_dvi(struct omap_dss_device *dssdev) > +{ > + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 0); > + dvi_enabled = 0; > +} > + > +static struct omap_dss_device thunder_dvi_device = { > + .type = OMAP_DISPLAY_TYPE_DPI, > + .name = "dvi", > + .driver_name = "generic_panel", > + .phy.dpi.data_lines = 24, > + .platform_enable = thunder_enable_dvi, > + .platform_disable = thunder_disable_dvi, > +}; > + > +static struct omap_dss_device *thunder_dss_devices[] = { > + &thunder_lcd_device, > + &thunder_dvi_device, > +}; > + > +static struct omap_dss_board_info thunder_dss_data = { > + .num_devices = ARRAY_SIZE(thunder_dss_devices), > + .devices = thunder_dss_devices, > + .default_device = &thunder_lcd_device, > +}; > + > +static struct platform_device thunder_dss_device = { > + .name = "omapdss", > + .id = -1, > + .dev = { > + .platform_data = &thunder_dss_data, > + }, > +}; > + > +static struct regulator_consumer_supply thunder_vdds_dsi_supply = { > + .supply = "vdds_dsi", > + .dev = &thunder_dss_device.dev, > +}; > + > +static struct mtd_partition omap3thunder_nand_partitions[] = { > + /* All the partition sizes are listed in terms of NAND block size */ > + { > + .name = "X-Loader", > + .offset = 0, > + .size = 4 * NAND_BLOCK_SIZE, > + .mask_flags = MTD_WRITEABLE, /* force read-only */ > + }, > + { > + .name = "U-Boot", > + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ > + .size = 15 * NAND_BLOCK_SIZE, > + .mask_flags = MTD_WRITEABLE, /* force read-only */ > + }, > + { > + .name = "U-Boot Env", > + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ > + .size = 1 * NAND_BLOCK_SIZE, > + }, > + { > + .name = "Kernel", > + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ > + .size = 32 * NAND_BLOCK_SIZE, > + }, > + { > + .name = "File System", > + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ > + .size = MTDPART_SIZ_FULL, > + }, > +}; > + > +static struct omap_nand_platform_data omap3thunder_nand_data = { > + .options = NAND_BUSWIDTH_16, > + .parts = omap3thunder_nand_partitions, > + .nr_parts = ARRAY_SIZE(omap3thunder_nand_partitions), > + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ > + .nand_setup = NULL, > + .dev_ready = NULL, > +}; > + > +static struct resource omap3thunder_nand_resource = { > + .flags = IORESOURCE_MEM, > +}; > + > +static struct platform_device omap3thunder_nand_device = { > + .name = "omap2-nand", > + .id = -1, > + .dev = { > + .platform_data = &omap3thunder_nand_data, > + }, > + .num_resources = 1, > + .resource = &omap3thunder_nand_resource, > +}; > + > +#include "sdram-micron-mt46h32m32lf-6.h" > + > +static struct omap_uart_config omap3_thunder_uart_config __initdata = { > + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > +}; > + > +static struct twl4030_usb_data thunder_usb_data = { > + .usb_mode = T2_USB_MODE_ULPI, > +}; > + > +static struct twl4030_hsmmc_info mmc[] = { > + { > + .mmc = 1, > + .wires = 8, > + .gpio_cd = -EINVAL, > + .gpio_wp = 29, > + }, > + { > + .mmc = 2, > + .wires = 4, > + .gpio_cd = -EINVAL, > + .gpio_wp = -EINVAL, > + > + }, > + {} /* Terminator */ > +}; > + > +static struct regulator_consumer_supply thunder_vmmc1_supply = { > + .supply = "vmmc", > +}; > + > +static struct regulator_consumer_supply thunder_vmmc2_supply = { > + .supply = "vmmc", > +}; > + > + > +static struct regulator_consumer_supply thunder_vsim_supply = { > + .supply = "vmmc_aux", > +}; > + > +static struct gpio_led gpio_leds[] = { > + { > + .name = "thunderboard::usr0", > + .default_trigger = "heartbeat", > + .gpio = -EINVAL, /* gets replaced */ > + .active_low = true, > + }, > +}; > + > +static int thunder_twl_gpio_setup(struct device *dev, > + unsigned gpio, unsigned ngpio) > +{ > + omap_mux_init_gpio(29,OMAP_PIN_INPUT); > + mmc[0].gpio_cd = gpio + 0; > + twl4030_mmc_init(mmc); > + > + /* link regulators to MMC adapters */ > + thunder_vmmc1_supply.dev = mmc[0].dev; > + thunder_vmmc2_supply.dev = mmc[1].dev; > + thunder_vsim_supply.dev = mmc[0].dev; > + > + /* the LED marked LED 2 (LEDA) */ > + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; > + > + /* gpio + 7 == DVI Enable */ > + gpio_request(gpio + 7, "EN_DVI"); > + gpio_direction_output(gpio + 7, 0); > + > + return 0; > +} > + > +static struct twl4030_gpio_platform_data thunder_gpio_data = { > + .gpio_base = OMAP_MAX_GPIO_LINES, > + .irq_base = TWL4030_GPIO_IRQ_BASE, > + .irq_end = TWL4030_GPIO_IRQ_END, > + .use_leds = false, > + .pullups = BIT(1), > + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) > + | BIT(15) | BIT(16) | BIT(17), > + .setup = thunder_twl_gpio_setup, > +}; > + > + > +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) > */ > +static struct regulator_init_data thunder_vmmc1 = { > + .constraints = { > + .min_uV = 1850000, > + .max_uV = 3150000, > + .valid_modes_mask = REGULATOR_MODE_NORMAL > + | REGULATOR_MODE_STANDBY, > + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE > + | REGULATOR_CHANGE_MODE > + | REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = 1, > + .consumer_supplies = &thunder_vmmc1_supply, > +}; > + > + > +static struct regulator_init_data thunder_vmmc2 = { > + .constraints = { > + .min_uV = 1850000, > + .max_uV = 3150000, > + .apply_uV = true, > + .valid_modes_mask = REGULATOR_MODE_NORMAL > + | REGULATOR_MODE_STANDBY, > + .valid_ops_mask = REGULATOR_CHANGE_MODE > + | REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = 1, > + .consumer_supplies = &thunder_vmmc2_supply, > +}; > + > +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ > +static struct regulator_init_data thunder_vsim = { > + .constraints = { > + .min_uV = 1800000, > + .max_uV = 3000000, > + .valid_modes_mask = REGULATOR_MODE_NORMAL > + | REGULATOR_MODE_STANDBY, > + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE > + | REGULATOR_CHANGE_MODE > + | REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = 1, > + .consumer_supplies = &thunder_vsim_supply, > +}; > + > +static struct regulator_consumer_supply thunder_vdda_dac_supply = { > + .supply = "vdda_dac", > + .dev = &thunder_dss_device.dev, > +}; > + > + > +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ > +static struct regulator_init_data thunder_vdac = { > + .constraints = { > + .min_uV = 1800000, > + .max_uV = 1800000, > + .apply_uV = true, > + .valid_modes_mask = REGULATOR_MODE_NORMAL > + | REGULATOR_MODE_STANDBY, > + .valid_ops_mask = REGULATOR_CHANGE_MODE > + | REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = 1, > + .consumer_supplies = &thunder_vdda_dac_supply, > +}; > + > +/* VPLL2 for digital video outputs */ > +static struct regulator_init_data thunder_vpll2 = { > + .constraints = { > + .name = "VDVI", > + .min_uV = 1800000, > + .max_uV = 1800000, > + .valid_modes_mask = REGULATOR_MODE_NORMAL > + | REGULATOR_MODE_STANDBY, > + .valid_ops_mask = REGULATOR_CHANGE_MODE > + | REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = 1, > + .consumer_supplies = &thunder_vdds_dsi_supply, > +}; > + > + > + > +static struct twl4030_platform_data thunder_twldata = { > + .irq_base = TWL4030_IRQ_BASE, > + .irq_end = TWL4030_IRQ_END, > + > + /* platform_data for children goes here */ > + .usb = &thunder_usb_data, > + .gpio = &thunder_gpio_data, > + .vmmc1 = &thunder_vmmc1, > + .vmmc2 = &thunder_vmmc2, > + .vsim = &thunder_vsim, > + .vdac = &thunder_vdac, > + .vpll2 = &thunder_vpll2, > +}; > + > +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = { > + { > + I2C_BOARD_INFO("twl4030", 0x48), > + .flags = I2C_CLIENT_WAKE, > + .irq = INT_34XX_SYS_NIRQ, > + .platform_data = &thunder_twldata, > + }, > +}; > + > +static int __init omap3_thunder_i2c_init(void) > +{ > + omap_register_i2c_bus(1, 2600, thunder_i2c_boardinfo, > ARRAY_SIZE(thunder_i2c_boardinfo)); > + omap_register_i2c_bus(2, 100,NULL, 0); > + omap_register_i2c_bus(3, 100, NULL, 0); > + return 0; > +} > + > +static void __init omap3_thunder_init_irq(void) > +{ > + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > mt46h32m32lf6_sdrc_params); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > +static struct gpio_led_platform_data gpio_led_info = { > + .leds = gpio_leds, > + .num_leds = ARRAY_SIZE(gpio_leds), > +}; > + > +static struct platform_device leds_gpio = { > + .name = "leds-gpio", > + .id = -1, > + .dev = { > + .platform_data = &gpio_led_info, > + }, > +}; > + > +static struct gpio_keys_button gpio_buttons[] = { > + { > + .code = BTN_EXTRA, > + .gpio = 7, > + .desc = "user", > + .wakeup = 1, > + }, > +}; > + > +static struct gpio_keys_platform_data gpio_key_info = { > + .buttons = gpio_buttons, > + .nbuttons = ARRAY_SIZE(gpio_buttons), > +}; > + > +static struct platform_device keys_gpio = { > + .name = "gpio-keys", > + .id = -1, > + .dev = { > + .platform_data = &gpio_key_info, > + }, > +}; > + > +static void ads7846_dev_init(void) > +{ > + if (gpio_request(OMAP3_THUNDER_TS_GPIO, "ADS7846 pendown") < 0) > + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); > + > + gpio_direction_input(OMAP3_THUNDER_TS_GPIO); > + > + omap_set_gpio_debounce(OMAP3_THUNDER_TS_GPIO, 1); > + omap_set_gpio_debounce_time(OMAP3_THUNDER_TS_GPIO, 0xa); > +} > + > +static int ads7846_get_pendown_state(void) > +{ > + return !gpio_get_value(OMAP3_THUNDER_TS_GPIO); > +} > + > +struct ads7846_platform_data ads7846_config = { > + .x_max = 0x0fff, > + .y_max = 0x0fff, > + .x_plate_ohms = 180, > + .pressure_max = 255, > + .debounce_max = 10, > + .debounce_tol = 3, > + .debounce_rep = 1, > + .get_pendown_state = ads7846_get_pendown_state, > + .keep_vref_on = 1, > + .settle_delay_usecs = 150, > +}; > + > + > +static struct omap2_mcspi_device_config ads7846_mcspi_config = { > + .turbo_mode = 0, > + .single_channel = 1, /* 0: slave, 1: master */ > +}; > + > + > +struct spi_board_info omap3thunder_spi_board_touch[] = { > + { > + .modalias = "ads7846", > + .bus_num = 1, > + .chip_select = 0, > + .max_speed_hz = 1500000, > + .controller_data = &ads7846_mcspi_config, > + .irq = OMAP_GPIO_IRQ(OMAP3_THUNDER_TS_GPIO), > + .platform_data = &ads7846_config, > + }, > +}; > + > + > +/* G-sensor on SPI bus 4 */ > +static struct spi_board_info omap3thunder_spi_board_info[] = { > + { > + .modalias = "spidev", > + .max_speed_hz = 1500000, > + .bus_num = 4, > + .chip_select = 0, > + .mode = SPI_MODE_0, > + }, > +}; > + > +static struct omap_board_config_kernel omap3_thunder_config[] __initdata = { > +}; > + > +static struct platform_device *omap3_thunder_devices[] __initdata = { > + &thunder_dss_device, > + &leds_gpio, > + &keys_gpio, > +}; > + > +static void __init omap3thunder_flash_init(void) > +{ > + u8 cs = 0; > + u8 nandcs = GPMC_CS_NUM + 1; > + > + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; > + > + /* find out the chip-select on which NAND exists */ > + while (cs < GPMC_CS_NUM) { > + u32 ret = 0; > + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); > + > + if ((ret & 0xC00) == 0x800) { > + printk(KERN_INFO "Found NAND on CS%d\n", cs); > + if (nandcs > GPMC_CS_NUM) > + nandcs = cs; > + } > + cs++; > + } > + > + if (nandcs > GPMC_CS_NUM) { > + printk(KERN_INFO "NAND: Unable to find configuration " > + "in GPMC\n "); > + return; > + } > + > + if (nandcs < GPMC_CS_NUM) { > + omap3thunder_nand_data.cs = nandcs; > + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *) > + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); > + omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); > + > + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); > + if (platform_device_register(&omap3thunder_nand_device) < 0) > + printk(KERN_ERR "Unable to register NAND device\n"); > + } > +} > + > + > +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { > + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, > + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, > + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, > + > + .phy_reset = false, > + .reset_gpio_port[0] = -EINVAL, > + .reset_gpio_port[1] = 162, > + .reset_gpio_port[2] = -EINVAL > +}; > + > +static void __init omap3_thunder_init(void) > +{ > + omap3_thunder_i2c_init(); > + > + /* Turn on Wireless LAN */ > + gpio_request( 157 , "WIFI ENABLE"); > + gpio_direction_output( 157, 0); > + > + platform_add_devices(omap3_thunder_devices, > + ARRAY_SIZE(omap3_thunder_devices)); > + omap_board_config = omap3_thunder_config; > + omap_board_config_size = ARRAY_SIZE(omap3_thunder_config); > + omap_serial_init(); > + > + usb_musb_init(); > + usb_ehci_init(&ehci_pdata); > + omap3thunder_flash_init(); > + > + ads7846_dev_init(); > + spi_register_board_info(omap3thunder_spi_board_touch, > ARRAY_SIZE(omap3thunder_spi_board_touch)); > + spi_register_board_info(omap3thunder_spi_board_info, > ARRAY_SIZE(omap3thunder_spi_board_info)); > + > + thunder_display_init(); > +} > + > +static void __init omap3_thunder_map_io(void) > +{ > + omap2_set_globals_343x(); > + omap2_map_common_io(); > +} > + > +MACHINE_START(OMAP3_THUNDER, "OMAP3 Thunder Board") > + /* Maintainer: Daniel Toussaint [email protected] */ > + .phys_io = 0x48000000, > + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, > + .boot_params = 0x80000100, > + .map_io = omap3_thunder_map_io, > + .init_irq = omap3_thunder_init_irq, > + .init_machine = omap3_thunder_init, > + .timer = &omap_timer, > +MACHINE_END > diff --git a/drivers/video/omap2/displays/Kconfig > b/drivers/video/omap2/displays/Kconfig > index 79d2861..a831fff 100644 > --- a/drivers/video/omap2/displays/Kconfig > +++ b/drivers/video/omap2/displays/Kconfig > @@ -25,4 +25,11 @@ config PANEL_TAAL > help > Taal DSI command mode panel from TPO. > > +config PANEL_LG_LB043WQ2 > + tristate "LG LB043WQ2 Panel" > + depends on OMAP2_DSS > + help > + LG LB043WQ2 Panel on Thunder board > + > + > endmenu > diff --git a/drivers/video/omap2/displays/Makefile > b/drivers/video/omap2/displays/Makefile > index d44e765..ae0c956 100644 > --- a/drivers/video/omap2/displays/Makefile > +++ b/drivers/video/omap2/displays/Makefile > @@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += > panel-samsung-lte430wq-f0c.o > obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o > > obj-$(CONFIG_PANEL_TAAL) += panel-taal.o > +obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o > + > diff --git a/drivers/video/omap2/displays/panel-lg-lb043wq2.c > b/drivers/video/omap2/displays/panel-lg-lb043wq2.c > new file mode 100644 > index 0000000..57a74f6 > --- /dev/null > +++ b/drivers/video/omap2/displays/panel-lg-lb043wq2.c > @@ -0,0 +1,118 @@ > +/* > + * LCD panel driver for LG LB043WQ2 panel > + * > + * Daniel Toussaint <[email protected]> > + * > + * Modified from Sharp LS037V7DW01 > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along > with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > + > + > +#include <linux/module.h> > +#include <linux/delay.h> > + > +#include <plat/display.h> > + > +static struct omap_video_timings lg_lb043wq2_timings = { > + .x_res = 480, > + .y_res = 272, > + > + .hsw = 41, > + .hfp = 8, > + .hbp = 45-41, > + > + .vsw = 10, > + .vfp = 4, > + .vbp = 12-10, > + > + > + .pixel_clock = 8000, > + > +}; > + > +static int lg_lb043wq2_panel_probe(struct omap_dss_device *dssdev) > +{ > + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > + OMAP_DSS_LCD_IHS; > + dssdev->panel.timings = lg_lb043wq2_timings; > + > + return 0; > +} > + > +static void lg_lb043wq2_panel_remove(struct omap_dss_device *dssdev) > +{ > +} > + > +static int lg_lb043wq2_panel_enable(struct omap_dss_device *dssdev) > +{ > + int r = 0; > + > + /* wait couple of vsyncs until enabling the LCD */ > + msleep(50); > + > + if (dssdev->platform_enable) > + r = dssdev->platform_enable(dssdev); > + > + return r; > +} > + > +static void lg_lb043wq2_panel_disable(struct omap_dss_device *dssdev) > +{ > + if (dssdev->platform_disable) > + dssdev->platform_disable(dssdev); > + > + /* wait at least 5 vsyncs after disabling the LCD */ > + > + msleep(100); > +} > + > +static int lg_lb043wq2_panel_suspend(struct omap_dss_device *dssdev) > +{ > + lg_lb043wq2_panel_disable(dssdev); > + return 0; > +} > + > +static int lg_lb043wq2_panel_resume(struct omap_dss_device *dssdev) > +{ > + return lg_lb043wq2_panel_enable(dssdev); > +} > + > +static struct omap_dss_driver lg_lb043wq2_driver = { > + .probe = lg_lb043wq2_panel_probe, > + .remove = lg_lb043wq2_panel_remove, > + > + .enable = lg_lb043wq2_panel_enable, > + .disable = lg_lb043wq2_panel_disable, > + .suspend = lg_lb043wq2_panel_suspend, > + .resume = lg_lb043wq2_panel_resume, > + > + .driver = { > + .name = "panel-lg-lb043wq2", > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init lg_lb043wq2_panel_drv_init(void) > +{ > + return omap_dss_register_driver(&lg_lb043wq2_driver); > +} > + > +static void __exit lg_lb043wq2_panel_drv_exit(void) > +{ > + omap_dss_unregister_driver(&lg_lb043wq2_driver); > +} > + > +module_init(lg_lb043wq2_panel_drv_init); > +module_exit(lg_lb043wq2_panel_drv_exit); > +MODULE_LICENSE("GPL"); > diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig > index 61952aa..2f6c6ae 100644 > --- a/sound/soc/omap/Kconfig > +++ b/sound/soc/omap/Kconfig > @@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020 > select SND_SOC_TWL4030 > help > Say Y if you want to add support for Soc audio on IGEP v2 board. > + > +config SND_OMAP_SOC_OMAP3_THUNDER > + tristate "SoC Audio support for OMAP3 Thunder" > + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER > + select SND_OMAP_SOC_MCBSP > + select SND_SOC_TWL4030 > + help > + Say Y if you want to add support for SoC audio on the Thunder > Board. > + > + > diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile > index d49458a..08c0918 100644 > --- a/sound/soc/omap/Makefile > +++ b/sound/soc/omap/Makefile > @@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o > snd-soc-omap3beagle-objs := omap3beagle.o > snd-soc-zoom2-objs := zoom2.o > snd-soc-igep0020-objs := igep0020.o > +snd-soc-omap3thunder-objs := omap3thunder.o > > obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o > obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o > @@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += > snd-soc-omap3pandora.o > obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o > obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o > obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o > +obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o > + > diff --git a/sound/soc/omap/omap3thunder.c b/sound/soc/omap/omap3thunder.c > new file mode 100644 > index 0000000..cd91dff > --- /dev/null > +++ b/sound/soc/omap/omap3thunder.c > @@ -0,0 +1,160 @@ > +/* > + * omap3 audio support for Technexion Thunder boards. > + * Modified from omap3beagle.c > + * Daniel Toussaint <[email protected]> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > + > +#include <linux/clk.h> > +#include <linux/platform_device.h> > +#include <sound/core.h> > +#include <sound/pcm.h> > +#include <sound/soc.h> > +#include <sound/soc-dapm.h> > + > +#include <asm/mach-types.h> > +#include <plat/hardware.h> > +#include <plat/gpio.h> > +#include <plat/mcbsp.h> > + > +#include "omap-mcbsp.h" > +#include "omap-pcm.h" > +#include "../codecs/twl4030.h" > + > +static int omap3thunder_hw_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; > + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; > + unsigned int fmt; > + int ret; > + > + switch (params_channels(params)) { > + case 2: /* Stereo I2S mode */ > + fmt = SND_SOC_DAIFMT_I2S | > + SND_SOC_DAIFMT_NB_NF | > + SND_SOC_DAIFMT_CBM_CFM; > + break; > + case 4: /* Four channel TDM mode */ > + fmt = SND_SOC_DAIFMT_DSP_A | > + SND_SOC_DAIFMT_IB_NF | > + SND_SOC_DAIFMT_CBM_CFM; > + break; > + default: > + return -EINVAL; > + } > + > + /* Set codec DAI configuration */ > + ret = snd_soc_dai_set_fmt(codec_dai, fmt); > + if (ret < 0) { > + printk(KERN_ERR "can't set codec DAI configuration\n"); > + return ret; > + } > + > + /* Set cpu DAI configuration */ > + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); > + if (ret < 0) { > + printk(KERN_ERR "can't set cpu DAI configuration\n"); > + return ret; > + } > + > + /* Set the codec system clock for DAC and ADC */ > + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, > + SND_SOC_CLOCK_IN); > + if (ret < 0) { > + printk(KERN_ERR "can't set codec system clock\n"); > + return ret; > + } > + > + return 0; > +} > + > +static struct snd_soc_ops omap3thunder_ops = { > + .hw_params = omap3thunder_hw_params, > +}; > + > +/* Digital audio interface glue - connects codec <--> CPU */ > +static struct snd_soc_dai_link omap3thunder_dai = { > + .name = "TWL4030", > + .stream_name = "TWL4030", > + .cpu_dai = &omap_mcbsp_dai[0], > + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], > + .ops = &omap3thunder_ops, > +}; > + > +/* Audio machine driver */ > +static struct snd_soc_card snd_soc_omap3thunder = { > + .name = "omap3thunder", > + .platform = &omap_soc_platform, > + .dai_link = &omap3thunder_dai, > + .num_links = 1, > +}; > + > +/* Audio subsystem */ > +static struct snd_soc_device omap3thunder_snd_devdata = { > + .card = &snd_soc_omap3thunder, > + .codec_dev = &soc_codec_dev_twl4030, > +}; > + > +static struct platform_device *omap3thunder_snd_device; > + > +static int __init omap3thunder_soc_init(void) > +{ > + int ret; > + > + if (!machine_is_omap3_thunder()) { > + pr_debug("Not OMAP3 thunder!\n"); > + return -ENODEV; > + } > + pr_info("OMAP3 thunder SoC init\n"); > + > + omap3thunder_snd_device = platform_device_alloc("soc-audio", -1); > + if (!omap3thunder_snd_device) { > + printk(KERN_ERR "Platform device allocation failed\n"); > + return -ENOMEM; > + } > + > + platform_set_drvdata(omap3thunder_snd_device, > &omap3thunder_snd_devdata); > + omap3thunder_snd_devdata.dev = &omap3thunder_snd_device->dev; > + *(unsigned int *)omap3thunder_dai.cpu_dai->private_data = 1; /* McBSP2 > */ > + > + ret = platform_device_add(omap3thunder_snd_device); > + if (ret) > + goto err1; > + > + return 0; > + > +err1: > + printk(KERN_ERR "Unable to add platform device\n"); > + platform_device_put(omap3thunder_snd_device); > + > + return ret; > +} > + > +static void __exit omap3thunder_soc_exit(void) > +{ > + platform_device_unregister(omap3thunder_snd_device); > +} > + > +module_init(omap3thunder_soc_init); > +module_exit(omap3thunder_soc_exit); > + > +MODULE_AUTHOR("Steve Sakoman <[email protected]>"); > +MODULE_DESCRIPTION("ALSA SoC OMAP3 thunder"); > +MODULE_LICENSE("GPL"); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
