This change implements the clocks, platform driver, and register information necessary to use the spi100k bus with OMAP 7xx systems.
The clocks added are dummy clocks because, although we're pretty sure there are clocks used for SPI, all current booting methods result in proper operation without the enabling of any other clocks. Signed-off-by: Cory Maccarrone <[email protected]> --- arch/arm/mach-omap1/clock.c | 4 +++ arch/arm/mach-omap1/devices.c | 34 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/omap7xx.h | 3 ++ 3 files changed, 41 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index dc8ca91..e584c0f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -135,6 +135,10 @@ static struct omap_clk omap_clks[] = { CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 23ded2d..20bc62c 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <asm/mach/map.h> @@ -23,6 +24,7 @@ #include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> +#include <plat/omap7xx.h> /*-------------------------------------------------------------------------*/ @@ -196,6 +198,37 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ +/* OMAP7xx SPI support */ +#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE) + +struct platform_device omap_spi1 = { + .name = "omap1_spi100k", + .id = 1, +}; + +struct platform_device omap_spi2 = { + .name = "omap1_spi100k", + .id = 2, +}; + +static void omap_init_spi100k(void) +{ + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); + BUG_ON(!omap_spi1.dev.platform_data); + + omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); + BUG_ON(!omap_spi2.dev.platform_data); + + platform_device_register(&omap_spi1); + platform_device_register(&omap_spi2); +} + +#else +static inline void omap_init_spi100k(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_OMAP_STI) #define OMAP1_STI_BASE 0xfffea000 @@ -263,6 +296,7 @@ static int __init omap1_init_devices(void) omap_init_mbox(); omap_init_rtc(); + omap_init_spi100k(); omap_init_sti(); return 0; diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h index 53f5241..48e4757 100644 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -46,6 +46,9 @@ #define OMAP7XX_DSPREG_SIZE SZ_128K #define OMAP7XX_DSPREG_START 0xE1000000 +#define OMAP7XX_SPI1_BASE 0xfffc0800 +#define OMAP7XX_SPI2_BASE 0xfffc1000 + /* * ---------------------------------------------------------------------------- * OMAP7XX specific configuration registers -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
