Hi Ranjith, one other question.
On Mon, 14 Dec 2009, Paul Walmsley wrote: > On Tue, 3 Nov 2009, Ranjith Lohithakshan wrote: > > > AM3517/05 has a few additional control module registers defined mainly > > to control the new IP's. This patch adds support for those new registers. Are these registers 3517-specific, or are they common to both AM3517 and 3505? If the latter, than please use "AM35XX" or something similar as the prefix for the macros below. - Paul > > diff --git a/arch/arm/plat-omap/include/plat/control.h > > b/arch/arm/plat-omap/include/plat/control.h > > index fdb6300..9ba907a 100644 > > --- a/arch/arm/plat-omap/include/plat/control.h > > +++ b/arch/arm/plat-omap/include/plat/control.h > > @@ -147,6 +147,15 @@ > > #define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) > > #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) > > > > +/* OMAP3517/AM3517 only CONTROL_GENERAL register offsets */ > > +#define OMAP3517_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038) > > +#define OMAP3517_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310) > > +#define OMAP3517_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314) > > +#define OMAP3517_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320) > > +#define OMAP3517_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324) > > +#define OMAP3517_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328) > > +#define OMAP3517_CONTROL_IP_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C) > > + > > /* 34xx D2D idle-related pins, handled by PM core */ > > #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 > > #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 > > @@ -238,6 +247,14 @@ > > #define FEAT_NEON 0 > > #define FEAT_NEON_NONE 1 > > > > +/* OMAP3517_CONTROL_IP_CLK_CTRL bits */ > > +#define OMAP3517_USBOTG_VBUSP_CLK_SHIFT 0 > > +#define OMAP3517_CPGMAC_VBUSP_CLK_SHIFT 1 > > +#define OMAP3517_VPFE_VBUSP_CLK_SHIFT 2 > > +#define OMAP3517_HECC_VBUSP_CLK_SHIFT 3 > > +#define OMAP3517_USBOTG_FCLK_SHIFT 8 > > +#define OMAP3517_CPGMAC_FCLK_SHIFT 9 > > +#define OMAP3517_VPFE_FCLK_SHIFT 10 > > > > #ifndef __ASSEMBLY__ > > #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ > > -- > > 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
