* Gadiyar, Anand <[email protected]> [091219 03:12]:
> > Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
> > GPIO_64 is connected to the PHY reset pin.
> >
> > Signed-off-by: Vikram Pandita <[email protected]>
> > Cc: Gadiyar, Anand <[email protected]>
>
> Except for one comment (see below),
>
> Acked-by: Anand Gadiyar <[email protected]>
>
> > ---
> > arch/arm/mach-omap2/board-zoom3.c | 16 ++++++++++++++++
> > 1 files changed, 16 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-zoom3.c
> > b/arch/arm/mach-omap2/board-zoom3.c
> > index a9fe918..a5e8036 100644
> > --- a/arch/arm/mach-omap2/board-zoom3.c
> > +++ b/arch/arm/mach-omap2/board-zoom3.c
> > @@ -20,6 +20,8 @@
> >
> > #include <plat/common.h>
> > #include <plat/board.h>
> > +#include <plat/usb.h>
> > +#include <plat/mux.h>
>
> I don't think you need plat/mux.h here?
>
> The omap_mux_init_gpio() call that you added, is declared
> in mux.h, that's included on the next line.
Correct, plat/mux.h should not be included for omap3 any longer.
It will also disappear for omap2 over next few weeks once I get
around fixing omap2 to use the new mux code.
Regards,
Tony
> >
> > #include "mux.h"
> > #include "sdram-hynix-h8mbx00u0mer-0em.h"
> > @@ -51,11 +53,25 @@ static struct omap_board_mux board_mux[] __initdata = {
> > #define board_mux NULL
> > #endif
> >
> > +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
> > + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> > + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
> > + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> > +
> > + .phy_reset = true,
> > + .reset_gpio_port[0] = -EINVAL,
> > + .reset_gpio_port[1] = 64,
> > + .reset_gpio_port[2] = -EINVAL
> > +};
> > +
> > static void __init omap_zoom_init(void)
> > {
> > omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
> > zoom_peripherals_init();
> > zoom_debugboard_init();
> > +
> > + omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
> > + usb_ehci_init(&ehci_pdata);
> > }
> >
> > MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
> > --
> > 1.6.6.rc0.66.ge160d
> >
> > --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
