"Luke-Jr" <[email protected]> writes:
> Add platform data and initialization for USB on Nokia N800 and N810 devices
> via the TUSB6010 chipset.
Excellent, thank you for doing this.
> Tested on Nokia N810 in Linux-OMAP tree. Mainline is not bootable yet.
What's the problem in mainline? I haven't tested n8x0 for months :(
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -117,6 +117,11 @@ config MACH_NOKIA_N8X0
> select MACH_NOKIA_N810
> select MACH_NOKIA_N810_WIMAX
>
> +config MACH_NOKIA_N8X0_USB
> + bool
> + depends on MACH_NOKIA_N8X0 && MACH_OMAP2_TUSB6010
> + default y
> +
Is is really needed to add new kconfig variable? Can't we just use
MACH_OMAP2_TUSB6010 in code?
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-n8x0-usb.c
I think a separate file is not needed, it's not that much code. I
recommend to just adding it directly to board-n8x0.c. It's simple and
easier for everyone.
> --- a/arch/arm/mach-omap2/board-n8x0.c
> +++ b/arch/arm/mach-omap2/board-n8x0.c
> @@ -109,8 +109,16 @@ static void __init n8x0_init_irq(void)
> omap_gpio_init();
> }
>
> +#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
> +extern void n8x0_usb_init(void);
> +#else
> +static inline void n8x0_usb_init (void) {}
> +#endif
CONFIG_MACH_NOKIA_N8X0_LCD does not look right here.
--
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
