ARM : OMAP : Remove #ifdef from board-omap3evm.c Remove #ifdef around usb_nop_xceiv_register()from board-omap3evm.c
Signed-off-by: Maulik Mankad <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Olof Johansson <[email protected]> Cc: Gupta, Ajay Kumar <[email protected]> --- Index: felipe_musb/arch/arm/mach-omap2/board-omap3evm.c =================================================================== --- felipe_musb.orig/arch/arm/mach-omap2/board-omap3evm.c +++ felipe_musb/arch/arm/mach-omap2/board-omap3evm.c @@ -444,10 +444,10 @@ static void __init omap3_evm_init(void) ARRAY_SIZE(omap3evm_spi_board_info)); omap_serial_init(); -#ifdef CONFIG_NOP_USB_XCEIV + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ usb_nop_xceiv_register(); -#endif + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
