"G.N, Vijayakumar" <[email protected]> writes:
> From 61474f885fe048dd1b8b6f17cfbd1690ff281c49 Mon Sep 17 00:00:00 2001
> From: Vijaykumar GN <[email protected]>
> Date: Mon, 21 Dec 2009 12:43:14 +0530
> Subject: [PATCH] OMAP3630 PM: Correct VDD1/VDD2 Retention and On voltage
>
> For OMAP3630 Retention Voltage must be set to OPP25
> 1. vdd1 retention voltage ==> 0.83
> 2. vdd2 retention voltage ==> 0.85
>
> On Voltage must be at default OPP (OPP100)
> 1. vdd1 on voltage ==> 1.1
> 2. vdd2 on voltage ==> 1.375
>
> Signed-off-by: Vishwanath Sripathy <[email protected]>
> Signed-off-by: Vijaykumar GN <[email protected]>
These are SoC-specific values, not board-specific values, right?
We should have a way to do this in SoC common code instead of
duplicating across board files.
Kevin
> ---
> arch/arm/mach-omap2/board-3630sdp.c | 19 +++++++++++++++++++
> arch/arm/mach-omap2/board-zoom3.c | 19 +++++++++++++++++++
> 2 files changed, 38 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-3630sdp.c
> b/arch/arm/mach-omap2/board-3630sdp.c
> index d509c08..4d464fb 100755
> --- a/arch/arm/mach-omap2/board-3630sdp.c
> +++ b/arch/arm/mach-omap2/board-3630sdp.c
> @@ -25,6 +25,24 @@
>
> #include "mux.h"
> #include "sdram-hynix-h8mbx00u0mer-0em.h"
> +#include "pm.h"
> +
> +/* Update with the optimal setup values to be used on 3630sdp */
> +static struct prm_setup_vc omap3_setuptime_table = {
> + .clksetup = 0x14A,
> + .voltsetup_time1 = 0x00B3,
> + .voltsetup_time2 = 0x00A0,
> + .voltoffset = 0x118,
> + .voltsetup2 = 0x32,
> + .vdd0_on = 0x28, /* 1.1v */
> + .vdd0_onlp = 0x20, /* 1.0v */
> + .vdd0_ret = 0x12, /* 0.83v */
> + .vdd0_off = 0x00, /* 0.6v */
> + .vdd1_on = 0x2B, /* 1.1375v */
> + .vdd1_onlp = 0x20, /* 1.0v */
> + .vdd1_ret = 0x14, /* 0.85v */
> + .vdd1_off = 0x00, /* 0.6v */
> +};
>
> #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
>
> @@ -79,6 +97,7 @@ static void __init omap_sdp_init_irq(void)
> {
> omap_board_config = sdp_config;
> omap_board_config_size = ARRAY_SIZE(sdp_config);
> + omap3_pm_init_vc(&omap3_setuptime_table);
> omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
> h8mbx00u0mer0em_sdrc_params,
> NULL, NULL, NULL);
> diff --git a/arch/arm/mach-omap2/board-zoom3.c
> b/arch/arm/mach-omap2/board-zoom3.c
> index 0778077..2c1f954 100644
> --- a/arch/arm/mach-omap2/board-zoom3.c
> +++ b/arch/arm/mach-omap2/board-zoom3.c
> @@ -23,6 +23,24 @@
>
> #include "mux.h"
> #include "sdram-hynix-h8mbx00u0mer-0em.h"
> +#include "pm.h"
> +
> +/* Update with the optimal setup values to be used on Zoom3 */
> +static struct prm_setup_vc omap3_setuptime_table = {
> + .clksetup = 0x14A,
> + .voltsetup_time1 = 0x00B3,
> + .voltsetup_time2 = 0x00A0,
> + .voltoffset = 0x118,
> + .voltsetup2 = 0x32,
> + .vdd0_on = 0x28, /* 1.1v */
> + .vdd0_onlp = 0x20, /* 1.0v */
> + .vdd0_ret = 0x12, /* 0.83v */
> + .vdd0_off = 0x00, /* 0.6v */
> + .vdd1_on = 0x2B, /* 1.1375v */
> + .vdd1_onlp = 0x20, /* 1.0v */
> + .vdd1_ret = 0x14, /* 0.85v */
> + .vdd1_off = 0x00, /* 0.6v */
> +};
>
> static void __init omap_zoom_map_io(void)
> {
> @@ -37,6 +55,7 @@ static void __init omap_zoom_init_irq(void)
> {
> omap_board_config = zoom_config;
> omap_board_config_size = ARRAY_SIZE(zoom_config);
> + omap3_pm_init_vc(&omap3_setuptime_table);
> omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
> h8mbx00u0mer0em_sdrc_params,
> NULL, NULL, NULL);
> --
> 1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
