Hi
Here are some changes we need for omap_hsmmc. They are dependent on OMAP
board files so it would be simplest if the patches all went via the OMAP
tree.
Adrian Hunter (7):
omap_hsmmc: move gpio and regulator control from board file
OMAP: rename mmc-twl4030 to hsmmc
OMAP: reconnect hsmmc context loss count
omap_hsmmc: RX51: set padconfs to pull down when powering off eMMC
omap_hsmmc: allow for power saving without going off
omap_hsmmc: fix disable timeouts
omap_hsmmc: allow for a shared VccQ
Denis Karpov (1):
omap_hsmmc: set DVFS/PM constraints
arch/arm/configs/rx51_defconfig | 4 +-
arch/arm/mach-omap2/Makefile | 28 +-
arch/arm/mach-omap2/board-2430sdp.c | 6 +-
arch/arm/mach-omap2/board-3430sdp.c | 6 +-
arch/arm/mach-omap2/board-cm-t35.c | 6 +-
arch/arm/mach-omap2/board-igep0020.c | 6 +-
arch/arm/mach-omap2/board-ldp.c | 6 +-
arch/arm/mach-omap2/board-omap3beagle.c | 6 +-
arch/arm/mach-omap2/board-omap3evm.c | 6 +-
arch/arm/mach-omap2/board-omap3pandora.c | 6 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 6 +-
arch/arm/mach-omap2/board-overo.c | 6 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 65 +++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +-
arch/arm/mach-omap2/control.c | 2 +
arch/arm/mach-omap2/hsmmc.c | 145 +++++++
arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} | 16 +-
arch/arm/mach-omap2/mmc-twl4030.c | 537 ------------------------
arch/arm/plat-omap/include/plat/control.h | 6 +
arch/arm/plat-omap/include/plat/mmc.h | 12 +-
drivers/mmc/host/omap_hsmmc.c | 456 +++++++++++++++++++-
21 files changed, 716 insertions(+), 619 deletions(-)
create mode 100644 arch/arm/mach-omap2/hsmmc.c
rename arch/arm/mach-omap2/{mmc-twl4030.h => hsmmc.h} (58%)
delete mode 100644 arch/arm/mach-omap2/mmc-twl4030.c
Regards
Adrian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
