Hi,
On Thu, Jan 14, 2010 at 03:59:51PM +0100, ext Thomas Weber wrote:
I use Kims patches and I have done some work on it over the time and
after the comments from Felipe, so I want to submit them one more time.
and you resent the same patch without my comments sorted out
diff --git a/arch/arm/mach-omap2/board-omap3devkit8000.c
b/arch/arm/mach-omap2/board-omap3devkit8000.c
new file mode 100644
index 0000000..5f85dc6
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3devkit8000.c
@@ -0,0 +1,616 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3devkit8000.c
+ *
+ * Copyright (C) 2008 Texas Instruments
still this part wasn't addressed.
+static struct platform_device omap3devkit8000_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3devkit8000_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3devkit8000_nand_resource,
neither this...
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .gpio = 186,
+ .active_low = true,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "mmc0",
+ .gpio = 163,
+ .active_low = true,
+ },
+ {
+ .name = "ledB",
+ .default_trigger = "none",
+ .gpio = 153,
+ .active_low = true,
+ },
+ {
+ .name = "led3",
+ .default_trigger = "none",
+ .gpio = 164, /* gets replaced */
nor this.
+static struct spi_board_info omap3devkit8000_spi_board_info[]
__initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+
nor this.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
