From: Tero Kristo <tero.kri...@nokia.com>
Previously omap_sram_idle() did not know about the difference between ON and
INACTIVE states, which complicated the state handling in these cases. Now,
the following changes are done in the idle logic:
- Check for IO-chain arming is changed to reflect desired state (RET)
- UART clocks will be disabled if we attempt to enter INACTIVE (this allows
the state change to actually happen)
Also, due to changes to pwrdm_set_next_pwrst() the behavior of
set_pwrdm_state() is modified accordingly.
Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
---
arch/arm/mach-omap2/pm34xx.c | 29 ++++++++++++++---------------
1 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 190f25c..dceb18f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -386,6 +386,7 @@ void omap_sram_idle(void)
mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
switch (mpu_next_state) {
case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
case PWRDM_POWER_RET:
/* No need to save context */
save_state = 0;
@@ -452,9 +453,11 @@ void omap_sram_idle(void)
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
- /* Enable IO-PAD and IO-CHAIN wakeups */
- prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
- omap3_enable_io_chain();
+ if (core_next_state <= PWRDM_POWER_RET) {
+ /* Enable IO-PAD and IO-CHAIN wakeups */
+ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+ omap3_enable_io_chain();
+ }
}
omap3_intc_prepare_idle();
@@ -556,15 +559,13 @@ void omap_sram_idle(void)
}
/* Disable IO-PAD and IO-CHAIN wakeup */
- if (core_next_state < PWRDM_POWER_ON) {
+ if (core_next_state <= PWRDM_POWER_RET) {
prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
omap3_disable_io_chain();
}
pwrdm_post_transition();
-
- omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
int omap3_can_sleep(void)
@@ -582,7 +583,6 @@ int omap3_can_sleep(void)
int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
{
u32 cur_state;
- int sleep_switch = 0;
int ret = 0;
if (pwrdm == NULL || IS_ERR(pwrdm))
@@ -598,12 +598,6 @@ int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
if (cur_state == state)
return ret;
- if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
- omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
- sleep_switch = 1;
- pwrdm_wait_transition(pwrdm);
- }
-
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
@@ -611,8 +605,13 @@ int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
goto err;
}
- if (sleep_switch) {
- omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ cur_state = pwrdm_read_pwrst(pwrdm);
+ if (cur_state < PWRDM_POWER_ON && cur_state != state) {
+ /* Force wakeup */
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ if (state < PWRDM_POWER_ON)
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
}
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
