Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.
NOTE: This patch depends on another patch to add the the \tmp register
into all debug-macro.S files. That can be done with:
$ sed -i -e "s/addruart,rx\|addruart, rx/addruart, rx, tmp/" \
arch/arm/*/include/*/debug-macro.S
Signed-off-by: Tony Lindgren <[email protected]>
---
arch/arm/boot/compressed/head.S | 20 ++++++++++----------
arch/arm/kernel/debug.S | 12 ++++++------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4fddc50..99b75aa 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,13 +22,13 @@
#if defined(CONFIG_DEBUG_ICEDCC)
#ifdef CONFIG_CPU_V6
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_V7)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
wait: mrc p14, 0, pc, c0, c1, 0
@@ -36,13 +36,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
@@ -58,7 +58,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
.endm
#if defined(CONFIG_ARCH_SA1100)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
@@ -67,13 +67,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
- .macro loadsp, rb
+ .macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
.endm
#else
- .macro loadsp, rb
- addruart \rb
+ .macro loadsp, rb, tmp
+ addruart \rb, \tmp
.endm
#endif
#endif
@@ -1025,7 +1025,7 @@ phex: adr r3, phexbuf
strb r2, [r3, r1]
b 1b
-puts: loadsp r3
+puts: loadsp r3, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@@ -1042,7 +1042,7 @@ puts: loadsp r3
putc:
mov r2, r0
mov r0, #0
- loadsp r3
+ loadsp r3, r1
b 2b
memdump: mov r12, r0
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5c91add..a38b487 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
#if defined(CONFIG_CPU_V6)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -51,7 +51,7 @@
#elif defined(CONFIG_CPU_V7)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -71,7 +71,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
#elif defined(CONFIG_CPU_XSCALE)
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -98,7 +98,7 @@ wait: mrc p14, 0, pc, c0, c1, 0
#else
- .macro addruart, rx
+ .macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
@@ -164,7 +164,7 @@ ENDPROC(printhex2)
.ltorg
ENTRY(printascii)
- addruart r3
+ addruart r3, r1
b 2f
1: waituart r2, r3
senduart r1, r3
@@ -180,7 +180,7 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
- addruart r3
+ addruart r3, r1
mov r1, r0
mov r0, #0
b 1b
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
