Sanjeev Premi <[email protected]> writes:
> When 'enable_off_mode' is 0, the target power state for MPU
> and CORE was locally changed to PWRDM_POWER_RET but, the
> statistics are updated for idle state originally selected
> by the governor.
>
> This patch 'invalidates' the idle states that lead either of
> MPU or Core to PWRDM_POWER_OFF state when 'enable_off_mode'
> is '0'. The states are valid once 'enable_off_mode' is set
> to '1'.
>
> Added function next_valid_state() to check if current state
> is valid; else get the next valid state. It is called from
> omap3_enter_idle_bm().
>
> This revision takes in changes suggested by Kevin Hilman.
>
> Signed-off-by: Sanjeev Premi <[email protected]>
Thanks, pulling this into PM branch.
Kevin
> ---
> arch/arm/mach-omap2/cpuidle34xx.c | 98
> ++++++++++++++++++++++++++++++++++---
> arch/arm/mach-omap2/pm.h | 4 ++
> arch/arm/mach-omap2/pm34xx.c | 4 ++
> 3 files changed, 98 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c
> b/arch/arm/mach-omap2/cpuidle34xx.c
> index 12f0cbf..ff1ad3d 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -45,6 +45,8 @@
> #define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
> #define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
>
> +#define OMAP3_STATE_MAX OMAP3_STATE_C7
> +
> struct omap3_processor_cx {
> u8 valid;
> u8 type;
> @@ -104,13 +106,6 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
> local_irq_disable();
> local_fiq_disable();
>
> - if (!enable_off_mode) {
> - if (mpu_state < PWRDM_POWER_RET)
> - mpu_state = PWRDM_POWER_RET;
> - if (core_state < PWRDM_POWER_RET)
> - core_state = PWRDM_POWER_RET;
> - }
> -
> pwrdm_set_next_pwrst(mpu_pd, mpu_state);
> pwrdm_set_next_pwrst(core_pd, core_state);
>
> @@ -141,6 +136,67 @@ return_sleep_time:
> }
>
> /**
> + * next_valid_state - Find next valid c-state
> + * @dev: cpuidle device
> + * @state: Currently selected c-state
> + *
> + * If the current state is valid, it is returned back to the caller.
> + * Else, this function searches for a lower c-state which is still
> + * valid (as defined in omap3_power_states[]).
> + */
> +static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
> + struct cpuidle_state *curr)
> +{
> + struct cpuidle_state *next = NULL;
> + struct omap3_processor_cx *cx;
> +
> + cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
> +
> + /* Check if current state is valid */
> + if (cx->valid) {
> + return curr;
> + } else {
> + u8 idx = OMAP3_STATE_MAX;
> +
> + /*
> + * Reach the current state starting at highest C-state
> + */
> + for (; idx >= OMAP3_STATE_C1; idx--) {
> + if (&dev->states[idx] == curr) {
> + next = &dev->states[idx];
> + break;
> + }
> + }
> +
> + /*
> + * Should never hit this condition.
> + */
> + WARN_ON(next == NULL);
> +
> + /*
> + * Drop to next valid state.
> + * Start search from the next (lower) state.
> + */
> + idx--;
> + for (; idx >= OMAP3_STATE_C1; idx--) {
> + struct omap3_processor_cx *cx;
> +
> + cx = cpuidle_get_statedata(&dev->states[idx]);
> + if (cx->valid) {
> + next = &dev->states[idx];
> + break;
> + }
> + }
> + /*
> + * C1 and C2 are always valid.
> + * So, no need to check for 'next==NULL' outside this loop.
> + */
> + }
> +
> + return next;
> +}
> +
> +/**
> * omap3_enter_idle_bm - Checks for any bus activity
> * @dev: cpuidle device
> * @state: The target state to be programmed
> @@ -152,7 +208,7 @@ return_sleep_time:
> static int omap3_enter_idle_bm(struct cpuidle_device *dev,
> struct cpuidle_state *state)
> {
> - struct cpuidle_state *new_state = state;
> + struct cpuidle_state *new_state = next_valid_state(dev, state);
>
> if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
> BUG_ON(!dev->safe_state);
> @@ -165,6 +221,30 @@ static int omap3_enter_idle_bm(struct cpuidle_device
> *dev,
>
> DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
>
> +/**
> + * omap3_cpuidle_update_states - Update the cpuidle states.
> + *
> + * Currently, this function toggles the validity of idle states based upon
> + * the flag 'enable_off_mode'. When the flag is set all states are valid.
> + * Else, states leading to OFF state set to be invalid.
> + */
> +void omap3_cpuidle_update_states(void)
> +{
> + int i;
> +
> + for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
> + struct omap3_processor_cx *cx = &omap3_power_states[i];
> +
> + if (enable_off_mode) {
> + cx->valid = 1;
> + } else {
> + if ((cx->mpu_state == PWRDM_POWER_OFF) ||
> + (cx->core_state == PWRDM_POWER_OFF))
> + cx->valid = 0;
> + }
> + }
> +}
> +
> /* omap3_init_power_states - Initialises the OMAP3 specific C states.
> *
> * Below is the desciption of each C state.
> @@ -302,6 +382,8 @@ int __init omap3_idle_init(void)
> return -EINVAL;
> dev->state_count = count;
>
> + omap3_cpuidle_update_states();
> +
> if (cpuidle_register_device(dev)) {
> printk(KERN_ERR "%s: CPUidle register device failed\n",
> __func__);
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 7a9c2d0..09c0144 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -37,6 +37,10 @@ extern int omap2_pm_debug;
> #define omap2_pm_debug 0
> #endif
>
> +#if defined(CONFIG_CPU_IDLE)
> +extern void omap3_cpuidle_update_states(void);
> +#endif
> +
> #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
> extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
> extern int pm_dbg_regset_save(int reg_set);
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 5087b15..5320229 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -941,6 +941,10 @@ void omap3_pm_off_mode_enable(int enable)
> else
> state = PWRDM_POWER_RET;
>
> +#ifdef CONFIG_CPU_IDLE
> + omap3_cpuidle_update_states();
> +#endif
> +
> list_for_each_entry(pwrst, &pwrst_list, node) {
> pwrst->next_state = state;
> set_pwrdm_state(pwrst->pwrdm, state);
> --
> 1.6.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
