I am trying to migrate from kernel 28 to 32 on TI OMA3. Our board is derived from EVM board. In new kernel I can't see the partitions in flash, and found no file to set them.
Also I do get this warning now while boot: Hierarchical RCU implementation. NR_IRQS:368 Clocking rate (Crystal/Core/MPU): 12.0/332/500 MHz ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/clock34xx.c:773 omap3_noncore_dpll_set_rate+0x280/0x2c4() Modules linked in: [<c002a924>] (unwind_backtrace+0x0/0xdc) from [<c0049e74>] (warn_slowpath_common+0x48/0x60) [<c0049e74>] (warn_slowpath_common+0x48/0x60) from [<c0033d30>] (omap3_noncore_dpll_set_rate+0x280/0x2c4) [<c0033d30>] (omap3_noncore_dpll_set_rate+0x280/0x2c4) from [<c0031674>] (omap2_clk_set_rate+0x20/0x2c) [<c0031674>] (omap2_clk_set_rate+0x20/0x2c) from [<c003494c>] (clk_set_rate+0x4c/0xb0) [<c003494c>] (clk_set_rate+0x4c/0xb0) from [<c000e980>] (omap2_clk_init+0x124/0x1a0) [<c000e980>] (omap2_clk_init+0x124/0x1a0) from [<c000d6ec>] (omap2_init_common_hw+0x4c/0xe0) [<c000d6ec>] (omap2_init_common_hw+0x4c/0xe0) from [<c000ead8>] (omap3_evm_init_irq+0x28/0x94) [<c000ead8>] (omap3_evm_init_irq+0x28/0x94) from [<c000b1b0>] (init_IRQ+0x30/0x40) [<c000b1b0>] (init_IRQ+0x30/0x40) from [<c0008978>] (start_kernel+0x140/0x29c) [<c0008978>] (start_kernel+0x140/0x29c) from [<80008034>] (0x80008034) ---[ end trace 1b75b31a2719ed1c ]--- Reprogramming SDRC clock to 332000000 Hz GPMC revision 5.0 Do you know the reason and how to solve it? Thanks & regards Arno -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
