Thanks, Vaibhav Hiremath Platform Support Products Texas Instruments Inc Ph: +91-80-25099927
> -----Original Message----- > From: Stephen Rothwell [mailto:[email protected]] > Sent: Monday, February 08, 2010 11:55 AM > To: Tomi Valkeinen > Cc: [email protected]; [email protected]; > Hiremath, Vaibhav; Tony Lindgren; [email protected] > Subject: linux-next: manual merge of the omap_dss2 tree with the > omap tree > > Hi Tomi, > > Today's linux-next merge of the omap_dss2 tree got a conflict in > arch/arm/mach-omap2/board-am3517evm.c between commit > 13560d875d67c06239c82a6148c1b87075701fe9 ("AM3517: Enable basic I2C > Support") from the omap tree and commit > 56a3d0235cd50d14d7bd4d45e55d192aa0e78cac ("OMAP: AM3517: Enable DSS2 > for > AM3517EVM board") from the omap_dss2 tree. > > Juts overlapping additions. I fixed it up (see below) and can > carry the > fix as necessary. > > P.S. Tomi, this omap_dss2 commit only has your Acked-by not Signed- > off-by. > -- > Cheers, > Stephen Rothwell [email protected] > > diff --cc arch/arm/mach-omap2/board-am3517evm.c > index a166bcc,54af5f8..0000000 > --- a/arch/arm/mach-omap2/board-am3517evm.c > +++ b/arch/arm/mach-omap2/board-am3517evm.c > @@@ -33,15 -33,147 +34,156 @@@ > > #include "mux.h" > [Hiremath, Vaibhav] I don't see display.h being added here, but when I looked into linux-next repo, I could see that. I think the following commit only shows for the conflicted part, so should be ok. Thanks, Vaibhav > + #define LCD_PANEL_PWR 176 > + #define LCD_PANEL_BKLIGHT_PWR 182 > + #define LCD_PANEL_PWM 181 > + > + static int lcd_enabled; > + static int dvi_enabled; > + > + static void __init am3517_evm_display_init(void) > + { > + int r; > + > + omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); > + omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, > OMAP_PIN_INPUT_PULLDOWN); > + omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); > + /* > + * Enable GPIO 182 = LCD Backlight Power > + */ > + r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); > + if (r) { > + printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); > + return; > + } > + gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); > + /* > + * Enable GPIO 181 = LCD Panel PWM > + */ > + r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); > + if (r) { > + printk(KERN_ERR "failed to get lcd_pwm\n"); > + goto err_1; > + } > + gpio_direction_output(LCD_PANEL_PWM, 1); > + /* > + * Enable GPIO 176 = LCD Panel Power enable pin > + */ > + r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); > + if (r) { > + printk(KERN_ERR "failed to get lcd_panel_pwr\n"); > + goto err_2; > + } > + gpio_direction_output(LCD_PANEL_PWR, 1); > + > + printk(KERN_INFO "Display initialized successfully\n"); > + return; > + > + err_2: > + gpio_free(LCD_PANEL_PWM); > + err_1: > + gpio_free(LCD_PANEL_BKLIGHT_PWR); > + } > + > + static int am3517_evm_panel_enable_lcd(struct omap_dss_device > *dssdev) > + { > + if (dvi_enabled) { > + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); > + return -EINVAL; > + } > + gpio_set_value(LCD_PANEL_PWR, 1); > + lcd_enabled = 1; > + > + return 0; > + } > + > + static void am3517_evm_panel_disable_lcd(struct omap_dss_device > *dssdev) > + { > + gpio_set_value(LCD_PANEL_PWR, 0); > + lcd_enabled = 0; > + } > + > + static struct omap_dss_device am3517_evm_lcd_device = { > + .type = OMAP_DISPLAY_TYPE_DPI, > + .name = "lcd", > + .driver_name = "sharp_lq_panel", > + .phy.dpi.data_lines = 16, > + .platform_enable = am3517_evm_panel_enable_lcd, > + .platform_disable = am3517_evm_panel_disable_lcd, > + }; > + > + static int am3517_evm_panel_enable_tv(struct omap_dss_device > *dssdev) > + { > + return 0; > + } > + > + static void am3517_evm_panel_disable_tv(struct omap_dss_device > *dssdev) > + { > + } > + > + static struct omap_dss_device am3517_evm_tv_device = { > + .type = OMAP_DISPLAY_TYPE_VENC, > + .name = "tv", > + .driver_name = "venc", > + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, > + .platform_enable = am3517_evm_panel_enable_tv, > + .platform_disable = am3517_evm_panel_disable_tv, > + }; > + > + static int am3517_evm_panel_enable_dvi(struct omap_dss_device > *dssdev) > + { > + if (lcd_enabled) { > + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); > + return -EINVAL; > + } > + dvi_enabled = 1; > + > + return 0; > + } > + > + static void am3517_evm_panel_disable_dvi(struct omap_dss_device > *dssdev) > + { > + dvi_enabled = 0; > + } > + > + static struct omap_dss_device am3517_evm_dvi_device = { > + .type = OMAP_DISPLAY_TYPE_DPI, > + .name = "dvi", > + .driver_name = "generic_panel", > + .phy.dpi.data_lines = 24, > + .platform_enable = am3517_evm_panel_enable_dvi, > + .platform_disable = am3517_evm_panel_disable_dvi, > + }; > + > + static struct omap_dss_device *am3517_evm_dss_devices[] = { > + &am3517_evm_lcd_device, > + &am3517_evm_tv_device, > + &am3517_evm_dvi_device, > + }; > + > + static struct omap_dss_board_info am3517_evm_dss_data = { > + .num_devices = ARRAY_SIZE(am3517_evm_dss_devices), > + .devices = am3517_evm_dss_devices, > + .default_device = &am3517_evm_lcd_device, > + }; > + > + struct platform_device am3517_evm_dss_device = { > + .name = "omapdss", > + .id = -1, > + .dev = { > + .platform_data = &am3517_evm_dss_data, > + }, > + }; > + > +static int __init am3517_evm_i2c_init(void) > +{ > + omap_register_i2c_bus(1, 400, NULL, 0); > + omap_register_i2c_bus(2, 400, NULL, 0); > + omap_register_i2c_bus(3, 400, NULL, 0); > + > + return 0; > +} > + > /* > * Board initialization > */ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
