On Mon, Feb 15, 2010 at 2:11 PM, Hiremath, Vaibhav <[email protected]> wrote: >> -----Original Message----- >> From: Tomi Valkeinen [mailto:[email protected]] >> Sent: Monday, February 15, 2010 4:28 PM >> To: Hiremath, Vaibhav >> Cc: [email protected]; [email protected] >> Subject: RE: [PATCH 01/13] OMAP: DSS2: enable VDDS_DSI when using >> DPI >> >> On Mon, 2010-02-15 at 11:22 +0100, ext Hiremath, Vaibhav wrote: >> > > -----Original Message----- >> > > From: [email protected] [mailto:linux-omap- >> > > [email protected]] On Behalf Of Tomi Valkeinen >> > > Sent: Monday, February 08, 2010 9:26 PM >> > > To: [email protected]; [email protected] >> > > Cc: Tomi Valkeinen >> > > Subject: [PATCH 01/13] OMAP: DSS2: enable VDDS_DSI when using >> DPI >> > > >> > > It looks like on OMAP3 some DSS pins need VDDS_DSI to function >> > > properly. >> > > >> > > This has not been confirmed from TI, but looking at figure 15-1 >> > > "Display >> > > subsystem highlight" from the TRM, some data pins come near the >> DSI >> > > and SDI >> > > blocks. This is not very hard evidence, but the fact remains >> that >> > > with the >> > > power on, pixels are ok, and with the power off, pixels are not >> ok. >> > > >> > [Hiremath, Vaibhav] Tomi, sorry for delayed response. As usual >> stuck with some other issues. Below are some quick comments - >> > >> > I am not regulator expert, but as per my finding I believe it is >> nothing to do with pins position closure to each other. The actual >> root cause is TWL4030 Ownership bit. Please refer to the below mail- >> chain - >> > >> > http://marc.info/?l=linux-omap&m=126045146600334&w=2 >> >> But why is there a dependency on a regulator, if it has nothing to >> do >> with the pins? Why is vdds_dsi/vdds_sdi needed to get all pixels >> through? > [Hiremath, Vaibhav] I am not sure, what role ownership bit is playing here.
It effectively enables or disables the regulator. > > Thanks, > Vaibhav > >> >> Tomi >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
