From: Jonas Zetterberg <[email protected]>

If not configured it will be exported as normal GPIO led.

Signed-off-by: Jonas Zetterberg <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
---
 arch/arm/mach-omap2/board-igep0020.c |   30 ++++++++++++++++++++++++++++--
 1 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c 
b/arch/arm/mach-omap2/board-igep0020.c
index 4a5d663..748f418 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
@@ -354,9 +355,34 @@ static void __init igep2_display_init(void)
            gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
                pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
 }
+#ifdef CONFIG_LEDS_TRIGGERS
+static struct gpio_led gpio_leds[] = {
+       {
+               .name = "GPIO_LED1_RED",
+               .default_trigger = "heartbeat",
+               .gpio = IGEP2_GPIO_LED1_RED,
+       },
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+       .leds           = gpio_leds,
+       .num_leds       = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  =  &gpio_leds_info,
+       },
+};
+#endif
 
 static struct platform_device *igep2_devices[] __initdata = {
        &igep2_dss_device,
+#ifdef CONFIG_LEDS_TRIGGERS
+       &leds_gpio,
+#endif
 };
 
 static void __init igep2_init_irq(void)
@@ -456,14 +482,14 @@ static void __init igep2_init(void)
                gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
        } else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
+#ifndef CONFIG_LEDS_TRIGGERS
        if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
            (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
                gpio_export(IGEP2_GPIO_LED1_RED, 0);
                gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
        } else
                pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
-
+#endif
        /* GPIO W-LAN + Bluetooth combo module */
        if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
            (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to