Hi Moiz, On Tue, Feb 16, 2010 at 06:57:21PM -0600, Moiz Sonasath wrote: > This patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to > use only the external HW resistor >=470 Ohm for the assured > functionality in HS mode. > > While testing the I2C in High Speed mode, it was discovered that > without a proper pull-up resistor, there is data corruption during > multi-byte transfer. RTC(time_set) test case was used for testing. > > From the analysis done, it was concluded that ideally we need a > pull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for > assured performance in HS mode. Patch applied, many thanks.
Cheers, Samuel. > Signed-off-by: Moiz Sonasath <[email protected]> > Signed-off-by: Allen Pais <[email protected]> > --- > drivers/mfd/twl-core.c | 13 +++++++++++++ > include/linux/i2c/twl.h | 15 +++++++++++++++ > 2 files changed, 28 insertions(+), 0 deletions(-) > > diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c > index 2a76065..35ae2ee 100644 > --- a/drivers/mfd/twl-core.c > +++ b/drivers/mfd/twl-core.c > @@ -965,6 +965,7 @@ twl_probe(struct i2c_client *client, const struct > i2c_device_id *id) > int status; > unsigned i; > struct twl4030_platform_data *pdata = client->dev.platform_data; > + u8 temp; > > if (!pdata) { > dev_dbg(&client->dev, "no platform data?\n"); > @@ -1032,6 +1033,18 @@ twl_probe(struct i2c_client *client, const struct > i2c_device_id *id) > goto fail; > } > > + /* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. > + * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, > + * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. > + */ > + > + if (twl_class_is_4030()) { > + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); > + temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ > + I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); > + twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); > + } > + > status = add_children(pdata, id->driver_data); > fail: > if (status < 0) > diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h > index bf1c5be..fd95eca 100644 > --- a/include/linux/i2c/twl.h > +++ b/include/linux/i2c/twl.h > @@ -239,6 +239,21 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset); > > /*----------------------------------------------------------------------*/ > > +/*Interface Bit Register (INTBR) offsets > + *(Use TWL_4030_MODULE_INTBR) > + */ > + > +#define REG_GPPUPDCTR1 0x0F > + > +/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */ > + > +#define I2C_SCL_CTRL_PU BIT(0) > +#define I2C_SDA_CTRL_PU BIT(2) > +#define SR_I2C_SCL_CTRL_PU BIT(4) > +#define SR_I2C_SDA_CTRL_PU BIT(6) > + > +/*----------------------------------------------------------------------*/ > + > /* > * Keypad register offsets (use TWL4030_MODULE_KEYPAD) > * ... SIH/interrupt only > -- > 1.5.6.3 > -- Intel Open Source Technology Centre http://oss.intel.com/ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
