Mike Turquette <[email protected]> writes:
> Gopinath, Thara wrote:
>> This patch removes the pointer sr1, sr2 in smartreflex.c and
>> instead creatse a list for keeping track of multiple smartreflex
>> instances.. This makes it scalable for next gen OMAPs where there
>> are more than two smartreflex modules.
>>
>> Signed-off-by: Thara Gopinath <[email protected]>
>> ---
>> arch/arm/mach-omap2/smartreflex.c | 114
>> ++++++++++++++++++++++++------------
>> 1 files changed, 76 insertions(+), 38 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/smartreflex.c
>> b/arch/arm/mach-omap2/smartreflex.c
>> index 1c5ec37..4a9c2e2 100644
>> --- a/arch/arm/mach-omap2/smartreflex.c
>> +++ b/arch/arm/mach-omap2/smartreflex.c
>> @@ -26,6 +26,7 @@
>> #include <linux/kobject.h>
>> #include <linux/i2c/twl.h>
>> #include <linux/io.h>
>> +#include <linux/list.h>
>> #include <plat/omap34xx.h>
>> #include <plat/control.h>
>> @@ -51,9 +52,12 @@ struct omap_sr {
>> u32 opp5_nvalue;
>> u32 senp_mod, senn_mod;
>> void __iomem *srbase_addr;
>> - void __iomem *vpbase_addr;
>> + struct list_head node;
>> };
>> +/* sr_list contains all the instances of smartreflex module */
>> +static LIST_HEAD(sr_list);
>> +
>> #define SR_REGADDR(offs) (sr->srbase_addr + offset)
>> static inline void sr_write_reg(struct omap_sr *sr, unsigned
>> offset, u32 value)
>> @@ -78,6 +82,20 @@ static inline u32 sr_read_reg(struct omap_sr *sr,
>> unsigned offset)
>> return __raw_readl(SR_REGADDR(offset));
>> }
>> +static struct omap_sr *_sr_lookup(int srid)
>> +{
>> + struct omap_sr *sr_info, *temp_sr_info;
>> +
>> + sr_info = NULL;
>> + list_for_each_entry(temp_sr_info, &sr_list, node) {
>> + if (srid == temp_sr_info->srid) {
>> + sr_info = temp_sr_info;
>> + break;
>> + }
>> + }
>> + return sr_info;
>> +}
>> +
>> static int sr_clk_enable(struct omap_sr *sr)
>> {
>> if (clk_enable(sr->clk) != 0) {
>> @@ -151,11 +169,17 @@ static u8 get_vdd1_opp(void)
>> {
>> struct omap_opp *opp;
>> unsigned long freq;
>> + struct omap_sr *sr_info = _sr_lookup(SR1);
>
> Why has the list implementation been chosen over individually
> registered platform devices?
Not sure I follow your question exactly here, but IIUC, Thara converts
to individually registered platform_devices in the next patch. This
is a preliminary one to prepare for that. In PATCH 03/16, the devices
are found via hwmod then registered via omap_device_build() (which in
turn does the platform_device_register())
Kevin
> There seems to be a trend lately in
> device drivers to have a single platform device with either an array
> of pointers or a list implementation to track the multiple instances
> of the same device on a board. McBSP is another example of this
> approach.
>
> Why is that? Is it a bad idea to have each SR instance be a separate
> platform device? Please let me know if my question is nuts.
>
> Mike
>
>> - if (sr1.vdd_opp_clk == NULL || IS_ERR(sr1.vdd_opp_clk))
>> + if (!sr_info) {
>> + pr_warning("omap_sr struct corresponding to SR1 not found\n");
>> + return 0;
>> + }
>> +
>> + if (sr_info->vdd_opp_clk == NULL || IS_ERR(sr_info->vdd_opp_clk))
>> return 0;
>> - freq = sr1.vdd_opp_clk->rate;
>> + freq = sr_info->vdd_opp_clk->rate;
>> opp = opp_find_freq_ceil(OPP_MPU, &freq);
>> if (IS_ERR(opp))
>> return 0;
>> @@ -163,9 +187,9 @@ static u8 get_vdd1_opp(void)
>> * Use higher freq voltage even if an exact match is not available
>> * we are probably masking a clock framework bug, so warn
>> */
>> - if (unlikely(freq != sr1.vdd_opp_clk->rate))
>> + if (unlikely(freq != sr_info->vdd_opp_clk->rate))
>> pr_warning("%s: Available freq %ld != dpll freq %ld.\n",
>> - __func__, freq, sr1.vdd_opp_clk->rate);
>> + __func__, freq, sr_info->vdd_opp_clk->rate);
>> return opp_get_opp_id(opp);
>> }
>> @@ -174,11 +198,17 @@ static u8 get_vdd2_opp(void)
>> {
>> struct omap_opp *opp;
>> unsigned long freq;
>> + struct omap_sr *sr_info = _sr_lookup(SR2);
>> +
>> + if (!sr_info) {
>> + pr_warning("omap_sr struct corresponding to SR2 not found\n");
>> + return 0;
>> + }
>> - if (sr2.vdd_opp_clk == NULL || IS_ERR(sr2.vdd_opp_clk))
>> + if (sr_info->vdd_opp_clk == NULL || IS_ERR(sr_info->vdd_opp_clk))
>> return 0;
>> - freq = sr2.vdd_opp_clk->rate;
>> + freq = sr_info->vdd_opp_clk->rate;
>> opp = opp_find_freq_ceil(OPP_L3, &freq);
>> if (IS_ERR(opp))
>> return 0;
>> @@ -187,9 +217,9 @@ static u8 get_vdd2_opp(void)
>> * Use higher freq voltage even if an exact match is not available
>> * we are probably masking a clock framework bug, so warn
>> */
>> - if (unlikely(freq != sr2.vdd_opp_clk->rate))
>> + if (unlikely(freq != sr_info->vdd_opp_clk->rate))
>> pr_warning("%s: Available freq %ld != dpll freq %ld.\n",
>> - __func__, freq, sr2.vdd_opp_clk->rate);
>> + __func__, freq, sr_info->vdd_opp_clk->rate);
>> return opp_get_opp_id(opp);
>> }
>> @@ -694,14 +724,13 @@ static void sr_disable(struct omap_sr *sr)
>> void sr_start_vddautocomap(int srid, u32 target_opp_no)
>> {
>> - struct omap_sr *sr = NULL;
>> + struct omap_sr *sr = _sr_lookup(srid);
>> - if (srid == SR1)
>> - sr = &sr1;
>> - else if (srid == SR2)
>> - sr = &sr2;
>> - else
>> + if (!sr) {
>> + pr_warning("omap_sr struct corresponding to SR%d not found\n",
>> + srid);
>> return;
>> + }
>> if (sr->is_sr_reset == 1) {
>> sr_clk_enable(sr);
>> @@ -719,14 +748,13 @@ EXPORT_SYMBOL(sr_start_vddautocomap);
>> int sr_stop_vddautocomap(int srid)
>> {
>> - struct omap_sr *sr = NULL;
>> + struct omap_sr *sr = _sr_lookup(srid);
>> - if (srid == SR1)
>> - sr = &sr1;
>> - else if (srid == SR2)
>> - sr = &sr2;
>> - else
>> - return -EINVAL;
>> + if (!sr) {
>> + pr_warning("omap_sr struct corresponding to SR%d not found\n",
>> + srid);
>> + return false;
>> + }
>> if (sr->is_autocomp_active == 1) {
>> sr_disable(sr);
>> @@ -744,14 +772,13 @@ EXPORT_SYMBOL(sr_stop_vddautocomap);
>> void enable_smartreflex(int srid)
>> {
>> u32 target_opp_no = 0;
>> - struct omap_sr *sr = NULL;
>> + struct omap_sr *sr = _sr_lookup(srid);
>> - if (srid == SR1)
>> - sr = &sr1;
>> - else if (srid == SR2)
>> - sr = &sr2;
>> - else
>> + if (!sr) {
>> + pr_warning("omap_sr struct corresponding to SR%d not found\n",
>> + srid);
>> return;
>> + }
>> if (sr->is_autocomp_active == 1) {
>> if (sr->is_sr_reset == 1) {
>> @@ -779,15 +806,13 @@ void enable_smartreflex(int srid)
>> void disable_smartreflex(int srid)
>> {
>> u32 i = 0;
>> + struct omap_sr *sr = _sr_lookup(srid);
>> - struct omap_sr *sr = NULL;
>> -
>> - if (srid == SR1)
>> - sr = &sr1;
>> - else if (srid == SR2)
>> - sr = &sr2;
>> - else
>> + if (!sr) {
>> + pr_warning("omap_sr struct corresponding to SR%d not found\n",
>> + srid);
>> return;
>> + }
>> if (sr->is_autocomp_active == 1) {
>> if (sr->is_sr_reset == 0) {
>> @@ -920,7 +945,13 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32
>> current_opp,
>> static ssize_t omap_sr_vdd1_autocomp_show(struct kobject *kobj,
>> struct kobj_attribute *attr, char *buf)
>> {
>> - return sprintf(buf, "%d\n", sr1.is_autocomp_active);
>> + struct omap_sr *sr_info = _sr_lookup(SR1);
>> +
>> + if (!sr_info) {
>> + pr_warning("omap_sr struct corresponding to SR1 not found\n");
>> + return 0;
>> + }
>> + return sprintf(buf, "%d\n", sr_info->is_autocomp_active);
>> }
>> static ssize_t omap_sr_vdd1_autocomp_store(struct kobject *kobj,
>> @@ -960,7 +991,13 @@ static struct kobj_attribute sr_vdd1_autocomp = {
>> static ssize_t omap_sr_vdd2_autocomp_show(struct kobject *kobj,
>> struct kobj_attribute *attr, char *buf)
>> {
>> - return sprintf(buf, "%d\n", sr2.is_autocomp_active);
>> + struct omap_sr *sr_info = _sr_lookup(SR2);
>> +
>> + if (!sr_info) {
>> + pr_warning("omap_sr struct corresponding to SR2 not found\n");
>> + return 0;
>> + }
>> + return sprintf(buf, "%d\n", sr_info->is_autocomp_active);
>> }
>> static ssize_t omap_sr_vdd2_autocomp_store(struct kobject *kobj,
>> @@ -1010,7 +1047,6 @@ static int __init omap3_sr_init(void)
>> RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
>> ret |= twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg,
>> R_DCDC_GLOBAL_CFG);
>> -
>> if (cpu_is_omap34xx()) {
>> sr1.clk = clk_get(NULL, "sr1_fck");
>> sr2.clk = clk_get(NULL, "sr2_fck");
>> @@ -1036,6 +1072,8 @@ static int __init omap3_sr_init(void)
>> ret = sysfs_create_file(power_kobj, &sr_vdd2_autocomp.attr);
>> if (ret)
>> pr_err("sysfs_create_file failed: %d\n", ret);
>> + list_add(&sr1.node, &sr_list);
>> + list_add(&sr2.node, &sr_list);
>> return 0;
>> }
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
