Old code from original patch contains beagle board pins that are not available on the Devkit8000.
Signed-off-by: Thomas Weber <[email protected]> --- arch/arm/mach-omap2/board-devkit8000.c | 20 -------------------- 1 files changed, 0 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index c3b5e02..f8583ce 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -268,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, devkit8000_vmmc1_supply.dev = mmc[0].dev; devkit8000_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -664,12 +650,6 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - - gpio_request(170, "DVI_nPD"); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); devkit8000_flash_init(); -- 1.6.4.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
