Hi,

On Mon, Mar 29, 2010 at 08:46:37AM +0200, ext Agarwal, Preshit wrote:
In this patch SGX powervr_device is registered with it's platform specific
data to provide information about setting constraint through
omap_pm_set_min_bus_tput.
This patch removes the requirement of EXPORT_SYMBOL for the same function.

Signed-off-by: Preshit Agarwal <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

you shouldn't add my signed-off-by unless I explicitly tell you it's ok to do so :-)

Signed-off-by: Allen Pais <[email protected]>
---
arch/arm/mach-omap2/devices.c                  |   19 +++++++++++++++++++
arch/arm/mach-omap2/include/mach/omap_sgxdef.h |   23 +++++++++++++++++++++++
2 files changed, 42 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/include/mach/omap_sgxdef.h

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 23e4d77..a67ff0b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,6 +27,7 @@
#include <mach/gpio.h>
#include <plat/mmc.h>

+#include <mach/omap_sgxdef.h>
#include "mux.h"

#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@@ -786,6 +787,23 @@ static inline void omap_hdq_init(void)
static inline void omap_hdq_init(void) {}
#endif

+struct sgx_platform_data omap_sgx_data = {
+       .set_min_bus_tput = omap_sgx_pm_constraints,
+};

won't this break when !CONFIG_PM ??

+static struct platform_device powervr_device = {
+       .name           = "pvrsrvkm",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &omap_sgx_data,
+       },
+};
+
+static void omap_init_sgx(void)
+{
+       (void) platform_device_register(&powervr_device);
+}
+
/*-------------------------------------------------------------------------*/

static int __init omap2_init_devices(void)
@@ -800,6 +818,7 @@ static int __init omap2_init_devices(void)
        omap_hdq_init();
        omap_init_sti();
        omap_init_sha1_md5();
+       omap_init_sgx();

        return 0;
}
diff --git a/arch/arm/mach-omap2/include/mach/omap_sgxdef.h 
b/arch/arm/mach-omap2/include/mach/omap_sgxdef.h
new file mode 100644
index 0000000..a8e065b
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/omap_sgxdef.h
@@ -0,0 +1,23 @@
+#ifndef OMAP_SGXDEF_H
+#define OMAP_SGXDEF_H
+
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM
+struct sgx_platform_data {
+       void (*set_min_bus_tput)(struct device *dev, u8 agent_id,
+                                               unsigned long r);
+};
+
+static void omap_sgx_pm_constraints(struct device *dev, u8 agent_id,
+                                               unsigned long r)
+{
+       omap_pm_set_min_bus_tput(dev, agent_id, r);
+}
+#else
+static void omap_sgx_pm_contraints(struct device *dev, u8 agent_id,
+                                               unsigned long r)
+{
+}
+#endif

not here... the platform_data should always exist otherwise this won't compile. See that struct sgx_platform_data doesn't even exist if !CONFIG_PM and you still instantiate a variable of that type unconditionaly. I suggest you use:

header:

struct sgx_platform_data {
        void (*set_pm_constraints)(struct device *dev, u8 agent_id,
};

C-source:

#ifdef CONFIG_PM
static void omap_sgx_pm_constraints(struct device *dev, u8 agent_id,
                                                unsigned long r)
{
        omap_pm_set_min_bus_tput(dev, agent_id, r);
}
#else
static inline void omap_sgx_pm_constraints(struct device *dev,
                        u8 agent_id, unsigned long r)
{  }
#endif

struct sgx_platform_data omap_sgx_data = {
        .set_pm_constraints = omap_sgx_pm_constraints,
};

static struct platform_device powervr_device = {
        .name           = "pvrsrvkm",
        .id             = -1,
        .dev            = {
                .platform_data = &omap_sgx_data,
        },
};

--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to