This series of patch implements a updated TRITON power scripts.
Also moving the sleep, wakeup & warm_reset sequence to a generic script file,
which can be used by different OMAP3 board with the power companion chip
TWL4030.
This patch series is based off Kevin's tree origin/pm branch.
This changes are tested on OMAP3430 SDP board with:
enable_off_mode
voltage_off_while_idle
sleep_while_idle (VDD1/VDD2 voltage scaling to 0v) enabled in cpuidle
and suspned path.
Also tested for reboot and dvfs.
Changes to fix Kevins & Nishanths comments.
Lesly A M (5):
omap3: pm: fix for twl4030 script load
omap3: pm: Using separate clk/volt setup_time for RET and OFF states
omap3: pm: Generic TRITON power scripts for OMAP3 based boards
omap3: pm: Use generic TRITON power scripts for 3430SDP board
omap3: pm: Use generic TRITON power scripts for ZOOM[2,3], 3630SDP
board
arch/arm/mach-omap2/Makefile | 12 ++-
arch/arm/mach-omap2/board-3430sdp.c | 137 +++++++----------------
arch/arm/mach-omap2/board-3630sdp.c | 17 +++
arch/arm/mach-omap2/board-zoom-peripherals.c | 36 ++++++
arch/arm/mach-omap2/board-zoom2.c | 17 +++
arch/arm/mach-omap2/board-zoom3.c | 17 +++
arch/arm/mach-omap2/pm.h | 17 ---
arch/arm/mach-omap2/pm34xx.c | 14 ++-
arch/arm/mach-omap2/twl4030-script.c | 154 ++++++++++++++++++++++++++
arch/arm/mach-omap2/twl4030-script.h | 15 +++
arch/arm/mach-omap2/voltage.c | 149 ++++++++++++++++++-------
arch/arm/mach-omap2/voltage.h | 30 +++++
drivers/mfd/twl4030-power.c | 6 -
include/linux/i2c/twl.h | 4 +
14 files changed, 458 insertions(+), 167 deletions(-)
create mode 100644 arch/arm/mach-omap2/twl4030-script.c
create mode 100644 arch/arm/mach-omap2/twl4030-script.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
