Add platform initialization code for OHCI on the 3630SDP.
Signed-off-by: Anand Gadiyar <[email protected]>
---
arch/arm/mach-omap2/board-3630sdp.c | 7 +++++++
1 file changed, 7 insertions(+)
Index: linux-2.6/arch/arm/mach-omap2/board-3630sdp.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/board-3630sdp.c
+++ linux-2.6/arch/arm/mach-omap2/board-3630sdp.c
@@ -66,6 +66,12 @@ static const struct ehci_hcd_omap_platfo
.reset_gpio_port[2] = -EINVAL
};
+static const struct ohci_hcd_omap_platform_data ohci_pdata __initconst = {
+ .port_mode[0] = OMAP_OHCI_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_OHCI_PORT_MODE_UNUSED,
+ .port_mode[2] = OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+};
+
static void __init omap_sdp_map_io(void)
{
omap2_set_globals_36xx();
@@ -100,6 +106,7 @@ static void __init omap_sdp_init(void)
board_smc91x_init();
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
+ usb_ohci_init(&ohci_pdata);
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
