On 4/4/10, Ghorai, Sukumar <[email protected]> wrote: > Aldyth, > 1. Do you mean that NAND boot is not working? > 2. Does MMC/SD boot working? If yes, boot the platform from MMC/SD using the > latest x-loade/ u-boot and flush the same binaries to NAND using the > following commands. > mmcinit 0 > nand unlock 80000 80000 > nand erase 80000 80000 > fatload mmc 0 80000000 u-boot.bin > nand write.i 80000000 80000 ${filesize} > > nand unlock 0 80000 > nand erase 0 80000 > fatload mmc 0 80000000 MLO > nand write.i 80000000 0 ${filesize} > > Regards, > Ghorai > >> -----Original Message----- >> From: [email protected] [mailto:linux-omap- >> [email protected]] On Behalf Of Tar Gz >> Sent: 2010-04-04 11:13 >> To: linux-omap >> Subject: [ASK] OMAP 3430 LDP Trouble >> >> Hi all, >> i'm sorry if my english too bad >> >> I try to porting linux to omap 3430 LDP..but my board have trouble >> after i running this command: >> >> nand ecc sw >> nand unlock 80000 80000 >> nand erase 80000 80000 >> >> nand ecc hw >> nand unlock 0 80000 >> nand erase 0 80000 >> >> and if i try to turn on my board, BT led [blue led] always on and my >> minicom can't show anything...and i forget to setting the enviroment >> variable mmcinit.. >> >> my question is, how to make my board can run normally like before? >> >> best regards, >> Aldyth M >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to [email protected] >> More majordomo info at http://vger.kernel.org/majordomo-info.html >
but i can't enter prompt, my minincom can't show anything when i'm turn on my board. I'm using latest u-boot and x-loader / MLO but still can't booting and BT led [blue colour] always on. How solve my problem? best regards, Aldyth M -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
