Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | 
IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches 
both single-edge cases in addition to the intended both edges case. Fix it, 
replacing with a more accurate expression.

Created and tested againts linux-2.6.34-rc3.
Applicable to 2.6.33-stable as well.

Signed-off-by: Janusz Krzysztofik <[email protected]>
---
--- git/arch/arm/plat-omap/gpio.c.orig  2010-04-01 17:54:17.000000000 +0200
+++ git/arch/arm/plat-omap/gpio.c       2010-04-04 02:34:44.000000000 +0200
@@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct g
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_GPIO_INT_EDGE;
                l = __raw_readl(reg);
-               if (trigger & IRQ_TYPE_EDGE_BOTH)
+               if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
                        bank->toggle_mask |= 1 << gpio;
                if (trigger & IRQ_TYPE_EDGE_RISING)
                        l |= 1 << gpio;
@@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct g
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_INT_CONTROL;
                l = __raw_readl(reg);
-               if (trigger & IRQ_TYPE_EDGE_BOTH)
+               if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
                        bank->toggle_mask |= 1 << gpio;
                if (trigger & IRQ_TYPE_EDGE_RISING)
                        l |= 1 << gpio;
@@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct g
        case METHOD_GPIO_7XX:
                reg += OMAP7XX_GPIO_INT_CONTROL;
                l = __raw_readl(reg);
-               if (trigger & IRQ_TYPE_EDGE_BOTH)
+               if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
                        bank->toggle_mask |= 1 << gpio;
                if (trigger & IRQ_TYPE_EDGE_RISING)
                        l |= 1 << gpio;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to