From: Steve Sakoman <[email protected]>
Signed-off-by: Steve Sakoman <[email protected]>
---
diff --git a/arch/arm/mach-omap2/board-overo.c
b/arch/arm/mach-omap2/board-overo.c
index 8848c7c..ae23633 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -184,6 +184,11 @@ static inline void __init overo_init_smsc911x(void)
static inline void __init overo_init_smsc911x(void) { return; }
#endif
+struct flash_partitions {
+ struct mtd_partition *parts;
+ int nr_parts;
+};
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -213,34 +218,80 @@ static struct mtd_partition overo_nand_partitions[] = {
},
};
-static struct omap_nand_platform_data overo_nand_data = {
- .parts = overo_nand_partitions,
- .nr_parts = ARRAY_SIZE(overo_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+static struct flash_partitions overo_flash_partitions[] = {
+ {
+ /* NOR flash */
+ },
+ {
+ /* OneNAND */
+ },
+ {
+ /* NAND */
+ .parts = overo_nand_partitions,
+ .nr_parts = ARRAY_SIZE(overo_nand_partitions),
+ },
};
-static struct resource overo_nand_resource = {
- .flags = IORESOURCE_MEM,
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+/* Note that all values in this struct are in nanoseconds */
+static struct gpmc_timings nand_timings = {
+
+ .sync_clk = 0,
+
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
+
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
+
+ .we_off = 30,
+ .oe_off = 48,
+
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
+
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
};
-static struct platform_device overo_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &overo_nand_data,
- },
- .num_resources = 1,
- .resource = &overo_nand_resource,
+static struct omap_nand_platform_data overo_nand_data = {
+ .nand_setup = NULL,
+ .gpmc_t = &nand_timings,
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .dev_ready = NULL,
+ .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
};
+static void
+__init board_nand_init(struct flash_partitions overo_nand_parts, u8 cs)
+{
+ overo_nand_data.cs = cs;
+ overo_nand_data.parts = overo_nand_parts.parts;
+ overo_nand_data.nr_parts = overo_nand_parts.nr_parts;
+ overo_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
+
+ overo_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
+ GPMC_CS0_BASE + cs * GPMC_CS_SIZE);
-static void __init overo_flash_init(void)
+ gpmc_nand_init(&overo_nand_data);
+}
+#else
+static void
+__init board_nand_init(struct flash_partitions overo_nand_parts, u8 cs)
{
+}
+#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+
+static void
+__init overo_flash_init(struct flash_partitions partition_info[]) {
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -260,16 +311,8 @@ static void __init overo_flash_init(void)
return;
}
- if (nandcs < GPMC_CS_NUM) {
- overo_nand_data.cs = nandcs;
- overo_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&overo_nand_device) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
+ if (nandcs < GPMC_CS_NUM)
+ board_nand_init(partition_info[2], nandcs);
}
static struct omap2_hsmmc_info mmc[] = {
@@ -425,7 +468,7 @@ static void __init overo_init(void)
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
- overo_flash_init();
+ overo_flash_init(overo_flash_partitions);
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
