Op 14 apr 2010, om 15:56 heeft Hiremath, Vaibhav het volgende geschreven:
>>
>> +static struct regulator_consumer_supply beagle_vdvi_supply =
>> + REGULATOR_SUPPLY("vdds_dsi", "omapdss")l
>> +
> [Hiremath, Vaibhav] Koen, sorry but I think in hurry you miss-types it to 'l'
> instead of semi-colon.
>
> Let's get another cup of coffee.
I'll wait till tomorrow and re-test it on the device :)
>
> Thanks,
> Vaibhav
>
>
>> +static void __init beagle_display_init(void)
>> +{
>> + int r;
>> +
>> + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
>> + if (r < 0) {
>> + printk(KERN_ERR "Unable to get DVI reset GPIO\n");
>> + return;
>> + }
>> +
>> + gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
>> +}
>> +
>> #include "sdram-micron-mt46h32m32lf-6.h"
>>
>> static struct omap2_hsmmc_info mmc[] = {
>> @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
>> {} /* Terminator */
>> };
>>
>> -static struct platform_device omap3_beagle_lcd_device = {
>> - .name = "omap3beagle_lcd",
>> - .id = -1,
>> -};
>> -
>> -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
>> - .ctrl_name = "internal",
>> -};
>> -
>> static struct regulator_consumer_supply beagle_vmmc1_supply = {
>> .supply = "vmmc",
>> };
>> @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data
>> beagle_gpio_data = {
>> .setup = beagle_twl_gpio_setup,
>> };
>>
>> -static struct regulator_consumer_supply beagle_vdac_supply = {
>> - .supply = "vdac",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> -static struct regulator_consumer_supply beagle_vdvi_supply = {
>> - .supply = "vdvi",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220
>> mA) */
>> static struct regulator_init_data beagle_vmmc1 = {
>> .constraints = {
>> @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
>> },
>> };
>>
>> -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
>> - { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
>> -};
>> -
>> static void __init omap3_beagle_init_irq(void)
>> {
>> - omap_board_config = omap3_beagle_config;
>> - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
>> omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
>> mt46h32m32lf6_sdrc_params);
>> omap_init_irq();
>> @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
>> }
>>
>> static struct platform_device *omap3_beagle_devices[] __initdata = {
>> - &omap3_beagle_lcd_device,
>> &leds_gpio,
>> &keys_gpio,
>> + &beagle_dss_device,
>> };
>>
>> static void __init omap3beagle_flash_init(void)
>> @@ -456,8 +503,9 @@ static void __init omap3_beagle_init(void)
>> /* Ensure SDRC pins are mux'd for self-refresh */
>> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
>> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
>> -}
>>
>> + beagle_display_init();
>> +}
>> static void __init omap3_beagle_map_io(void)
>> {
>> omap2_set_globals_343x();
>> --
>> 1.6.6.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
