Hi,
> Signed-off-by: Vishwanath Sripathy <[email protected]>
> ---
>
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 55bde0d..2751d4b 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -60,6 +60,10 @@ struct prm_setup_vc {
>
> extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
> extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
> +extern int program_vdd2_opp_3430(void);
> +extern int reprogram_vdd2_opp_3430(void);
> +extern int program_vdd2_opp_3630(void);
> +extern int reprogram_vdd2_opp_3630(void);
>
> extern u32 wakeup_timer_seconds;
> extern struct omap_dm_timer *gptimer_wakeup;
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> old mode 100644
> new mode 100755
> index 2f5c894..6a6ed02
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -360,6 +360,7 @@ void omap_sram_idle(void)
> int core_prev_state, per_prev_state;
> u32 sdrc_pwr = 0;
> int per_state_modified = 0;
> + u32 fclk_status = 0;
>
> if (!_omap_sram_idle)
> return;
> @@ -416,8 +417,24 @@ void omap_sram_idle(void)
> */
> if (mpu_next_state <= PWRDM_POWER_RET)
> omap_smartreflex_disable(SR1);
> - if (core_next_state <= PWRDM_POWER_RET)
> - omap_smartreflex_disable(SR2);
> + if (core_next_state <= PWRDM_POWER_RET) {
> + fclk_status = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN) |
> + cm_read_mod_reg(CORE_MOD, CM_FCLKEN1) |
> + cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3) |
> + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN) |
> + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN) |
> + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN) |
> + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
> + if (!fclk_status) {
> + omap_smartreflex_disable(SR2);
> + if (cpu_is_omap3630())
> + program_vdd2_opp_3630();
> + else if (cpu_is_omap3430())
> + program_vdd2_opp_3430();
> + cm_rmw_mod_reg_bits(OMAP3430_AUTO_CORE_DPLL_MASK,
> + 0x1, PLL_MOD, CM_AUTOIDLE);
> + }
> + }
>
> /* CORE */
> if (core_next_state < PWRDM_POWER_ON) {
> @@ -517,8 +534,18 @@ void omap_sram_idle(void)
> */
> if (mpu_next_state <= PWRDM_POWER_RET)
> omap_smartreflex_enable(SR1);
> - if (core_next_state <= PWRDM_POWER_RET)
> - omap_smartreflex_enable(SR2);
> +
> + if (core_next_state <= PWRDM_POWER_RET) {
> + cm_rmw_mod_reg_bits(OMAP3430_AUTO_CORE_DPLL_MASK,
> + 0x0, PLL_MOD, CM_AUTOIDLE);
> + if (!fclk_status) {
> + if (cpu_is_omap3630())
> + reprogram_vdd2_opp_3630();
> + else if (cpu_is_omap3430())
> + reprogram_vdd2_opp_3430();
> + omap_smartreflex_enable(SR2);
> + }
> + }
>
> /* PER */
> if (per_next_state < PWRDM_POWER_ON) {
> @@ -553,6 +580,7 @@ void omap_sram_idle(void)
> omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
> }
>
> +
> int omap3_can_sleep(void)
> {
> if (!sleep_while_idle)
> @@ -938,8 +966,7 @@ static void __init prcm_setup_regs(void)
> cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
> MPU_MOD,
> CM_AUTOIDLE2);
> - cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
> - (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
> + cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT),
> PLL_MOD,
> CM_AUTOIDLE);
> cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
> diff --git a/arch/arm/mach-omap2/resource34xx.c
> b/arch/arm/mach-omap2/resource34xx.c
> index fc1b775..a52ae05 100644
> --- a/arch/arm/mach-omap2/resource34xx.c
> +++ b/arch/arm/mach-omap2/resource34xx.c
> @@ -154,7 +154,7 @@ static struct device dummy_dsp_dev;
> static struct device vdd2_dev;
> static int vdd1_lock;
> static int vdd2_lock;
> -static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk;
> +static struct clk *dpll1_clk, *dpll2_clk, *dpll3_clk, *l3_clk;
> static int curr_vdd1_opp;
> static int curr_vdd2_opp;
> static DEFINE_MUTEX(dvfs_mutex);
> @@ -214,7 +214,6 @@ static int __deprecated freq_to_opp(u8 *opp_id, enum
> opp_t opp_type,
> */
> void init_opp(struct shared_resource *resp)
> {
> - struct clk *l3_clk;
> int ret;
> u8 opp_id;
> resp->no_of_users = 0;
> @@ -553,3 +552,118 @@ int validate_freq(struct shared_resource *resp, u32
> target_level)
> return freq_to_opp(&x, OPP_DSP, target_level);
> return 0;
> }
> +
> +static struct omap_opp *c_vdd2_opp;
> +int program_vdd2_opp_3430()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp, *min_opp;
> + unsigned long vc, vt;
> +
> + min_opp = opp_find_freq_ceil(OPP_L3, &freq);
> + freq = ULONG_MAX;
> + c_vdd2_opp = c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> +
> + if (opp_get_freq(c_opp) != opp_get_freq(min_opp)) {
> + freq = opp_get_freq(min_opp);
> + lock_scratchpad_sem();
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> +#ifdef CONFIG_PM
> + omap3_save_scratchpad_contents();
> +#endif
> + unlock_scratchpad_sem();
> + }
> +
> + /* for omap3430, VDD2 should be at 1.2V */
> + vt = 1200000;
> + vc = opp_get_voltage(c_opp);
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
Here you call omap_voltage_scale with the voltages in uV as input.
> + return ret;
> +}
> +
> +int reprogram_vdd2_opp_3430()
> +{
> + int ret = 0, div;
> + unsigned long freq = 0;
> + struct omap_opp *c_opp;
> + u8 vc, vt;
> + unsigned long uvdc;
> +
> + c_opp = opp_find_freq_exact(OPP_L3, l3_clk->rate, true);
> + if (opp_get_freq(c_opp) != opp_get_freq(c_vdd2_opp)) {
> + freq = opp_get_freq(c_vdd2_opp);
> + div = cm_read_mod_reg(CORE_MOD, CM_CLKSEL) &
> + OMAP3430_CLKSEL_L3_MASK;
> + ret = clk_set_rate(dpll3_clk, freq * div);
> + }
> + vc = omap_twl_uv_to_vsel(1200000);
> + uvdc = opp_get_voltage(c_vdd2_opp);
> + vt = omap_twl_uv_to_vsel(uvdc);
> + ret = omap_voltage_scale(VDD2_OPP, vt, vc);
And here you call omap_voltage_scale with vsel values as input ??
Cheers,
Peter.
--
goa is a state of mind
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
