From: Janusz Krzysztofik <[email protected]> Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression.
Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/plat-omap/gpio.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 76a347b..45a225d 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
