Tiler support is not yet in OMAP builds. So multi-omap build will NOT break, but would exclude VRFB feature in the build.
> -----Original Message----- > From: Koen Kooi [mailto:[email protected]] > Sent: Monday, May 10, 2010 1:33 PM > To: Guruswamy, Senthilvadivu > Cc: [email protected]; > [email protected]; [email protected]; > [email protected]; Hiremath, Vaibhav > Subject: Re: [PATCH] DSS2 Include VRFB into omap2-3build only > > > Op 10 mei 2010, om 10:01 heeft Guruswamy, Senthilvadivu het > volgende geschreven: > > > Building a multi-omap kernel is not impacted as long as the > display is not choosen in the build. Usually display is > chosen from the board file. > > So you are saying it *IS* broken when wanting vrfb on omap3 > and tiler on omap4, right? > > > > > > >> -----Original Message----- > >> From: Koen Kooi [mailto:[email protected]] > >> Sent: Monday, May 10, 2010 1:10 PM > >> To: Guruswamy, Senthilvadivu > >> Cc: [email protected]; > >> [email protected]; [email protected]; > >> [email protected]; Hiremath, Vaibhav > >> Subject: Re: [PATCH] DSS2 Include VRFB into omap2-3build only > >> > >> > >> Op 10 mei 2010, om 08:48 heeft Senthilvadivu Guruswamy het > >> volgende geschreven: > >> > >>> Exclude VRFB from OMAP4 onwards and include only for > >>> OMAP2 and OMAP3 builds. In OMAP4 VRFB HW IP is replaced > >>> with a new HW IP "TILER" > >>> > >>> --- a/drivers/video/omap2/Kconfig > >>> +++ b/drivers/video/omap2/Kconfig > >>> @@ -3,6 +3,10 @@ config OMAP2_VRAM > >>> > >>> config OMAP2_VRFB > >>> bool > >>> + depends on FB_OMAP2 && (!ARCH_OMAP4) > >>> + default y if (ARCH_OMAP2 || ARCH_OMAP3) > >>> + help > >>> + OMAP VRFB buffer support is efficient for rotation > >> > >> How does this work for multi-omap kernels, e.g. building a > >> kernel with beagle and panda support? > >> > >> regards, > >> > >> Koen > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
