* Andrew Morton <[email protected]> [100513 12:36]: > On Thu, 13 May 2010 12:29:35 -0700 > Tony Lindgren <[email protected]> wrote: > > > * Cory Maccarrone <[email protected]> [100307 09:44]: > > > From: Marek Belisko <[email protected]> > > > > > > The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring > > > a modification of the register addresses in the mmc-omap driver. To > > > resolve > > > this, a bit shift is performed on base register addresses, either by 1 or > > > 2 > > > bits depending on the CPU in use. This yields the correct registers for > > > each CPU. > > > > > > Signed-off-by: Marek Belisko <[email protected]> > > > Signed-off-by: Cory Maccarrone <[email protected]> > > > Signed-off-by: Tony Lindgren <[email protected]> > > > > Can you please queue this patch too? Ben's comments in this thread > > were for the i2c-omap, not for this MMC patch. We've had this patch > > in the omap tree for testing for quite a while now. > > > > The patch is also available in at: > > > > https://patchwork.kernel.org/patch/83971/ > > > > with the direct link to the mbox being: > > > > https://patchwork.kernel.org/patch/83971/mbox/ > > I already have that, as > mmc-omap-add-support-for-16-bit-and-32-bit-registers.patch
OK, thanks. I should have checked your queue first. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
