Rename vdd0_/vdd1_ to vdd1_/vdd2_ in VC param structure.
Signed-off-by: Lesly A M <[email protected]>
Cc: Nishanth Menon <[email protected]>
Cc: David Derrick <[email protected]>
Cc: Samuel Ortiz <[email protected]>
---
arch/arm/mach-omap2/voltage.c | 34 +++++++++++++++++-----------------
arch/arm/mach-omap2/voltage.h | 10 +++++-----
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index f4069db..1c3f9ed 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -147,14 +147,14 @@ struct __initdata prm_setup_vc omap3430_vc_config = {
.voltoffset = 0x32,
},
/* VC COMMAND VALUES for VDD1/VDD2 */
- .vdd0_on = 0x30, /* 1.2v */
- .vdd0_onlp = 0x20, /* 1.0v */
- .vdd0_ret = 0x1e, /* 0.975v */
- .vdd0_off = 0x00, /* 0.6v */
- .vdd1_on = 0x2c, /* 1.15v */
+ .vdd1_on = 0x30, /* 1.2v */
.vdd1_onlp = 0x20, /* 1.0v */
- .vdd1_ret = 0x1e, /* .975v */
+ .vdd1_ret = 0x1e, /* 0.975v */
.vdd1_off = 0x00, /* 0.6v */
+ .vdd2_on = 0x2c, /* 1.15v */
+ .vdd2_onlp = 0x20, /* 1.0v */
+ .vdd2_ret = 0x1e, /* 0.975v */
+ .vdd2_off = 0x00, /* 0.6v */
};
/*
@@ -178,14 +178,14 @@ struct __initdata prm_setup_vc omap3630_vc_config = {
.voltoffset = 0x32,
},
/* VC COMMAND VALUES for VDD1/VDD2 */
- .vdd0_on = 0x28, /* 1.1v */
- .vdd0_onlp = 0x20, /* 1.0v */
- .vdd0_ret = 0x13, /* 0.83v */
- .vdd0_off = 0x00, /* 0.6v */
- .vdd1_on = 0x2B, /* 1.1375v */
+ .vdd1_on = 0x28, /* 1.1v */
.vdd1_onlp = 0x20, /* 1.0v */
.vdd1_ret = 0x13, /* 0.83v */
.vdd1_off = 0x00, /* 0.6v */
+ .vdd2_on = 0x2B, /* 1.1375v */
+ .vdd2_onlp = 0x20, /* 1.0v */
+ .vdd2_ret = 0x13, /* 0.83v */
+ .vdd2_off = 0x00, /* 0.6v */
};
static struct prm_setup_vc vc_config;
@@ -279,17 +279,17 @@ static void __init init_voltagecontroller(void)
VC_VOLRA0_SHIFT));
voltage_write_reg(vc_reg.cmdval0_reg,
- (vc_config.vdd0_on << VC_CMD_ON_SHIFT) |
- (vc_config.vdd0_onlp << VC_CMD_ONLP_SHIFT) |
- (vc_config.vdd0_ret << VC_CMD_RET_SHIFT) |
- (vc_config.vdd0_off << VC_CMD_OFF_SHIFT));
-
- voltage_write_reg(vc_reg.cmdval1_reg,
(vc_config.vdd1_on << VC_CMD_ON_SHIFT) |
(vc_config.vdd1_onlp << VC_CMD_ONLP_SHIFT) |
(vc_config.vdd1_ret << VC_CMD_RET_SHIFT) |
(vc_config.vdd1_off << VC_CMD_OFF_SHIFT));
+ voltage_write_reg(vc_reg.cmdval1_reg,
+ (vc_config.vdd2_on << VC_CMD_ON_SHIFT) |
+ (vc_config.vdd2_onlp << VC_CMD_ONLP_SHIFT) |
+ (vc_config.vdd2_ret << VC_CMD_RET_SHIFT) |
+ (vc_config.vdd2_off << VC_CMD_OFF_SHIFT));
+
voltage_write_reg(vc_ch_conf_reg, VC_CMD1 | VC_RAV1);
voltage_write_reg(vc_i2c_cfg_reg, VC_MCODE_SHIFT | VC_HSEN);
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index f8462c3..04c3bdf 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -28,15 +28,15 @@ struct prm_setup_vc {
/* CLK & VOLT SETUPTIME for OFF */
struct setuptime_vc off;
/* PRM_VC_CMD_VAL_0 specific bits */
- u16 vdd0_on;
- u16 vdd0_onlp;
- u16 vdd0_ret;
- u16 vdd0_off;
-/* PRM_VC_CMD_VAL_1 specific bits */
u16 vdd1_on;
u16 vdd1_onlp;
u16 vdd1_ret;
u16 vdd1_off;
+/* PRM_VC_CMD_VAL_1 specific bits */
+ u16 vdd2_on;
+ u16 vdd2_onlp;
+ u16 vdd2_ret;
+ u16 vdd2_off;
};
#define VOLTSCALE_VPFORCEUPDATE 1
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
