Adds the driver support for the TMP105 temperature sensor device. The interface
is I2C.The driver supports the read of the temperature values.
Signed-off-by: Shubhrajyoti D <shubhrajy...@ti.com>
---
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/tmp105.c | 326 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 337 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/tmp105.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68cf877..a4a5352 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1076,6 +1076,16 @@ config SENSORS_MC13783_ADC
help
Support for the A/D converter on MC13783 PMIC.
+config SENSORS_TMP105
+ tristate "Texas Instruments TMP421 and compatible"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments TMP105
+ temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp105.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4bc215c..2c4e7a5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
+obj-$(CONFIG_SENSORS_TMP105) += tmp105.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/tmp105.c b/drivers/hwmon/tmp105.c
new file mode 100644
index 0000000..8765b11
--- /dev/null
+++ b/drivers/hwmon/tmp105.c
@@ -0,0 +1,326 @@
+/*
+ * tmp105.c
+ *
+ * TMP105 temperature sensor driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Shubhrajyoti Datta <a0393...@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+/* Registers */
+#define TMP105_TEMP_REG 0x00
+#define TMP105_CONF_REG 0x01
+#define TMP105_TLOW_REG 0x02
+#define TMP105_THIGH_REG 0x03
+
+/* Configuration register parameters */
+#define TMP105_CONF_SD 0x01
+#define TMP105_CONF_TM 0x02
+#define TMP105_CONF_POL 0x04
+#define TMP105_CONF_F0 0x08
+#define TMP105_CONF_F1 0x10
+#define TMP105_CONF_R0 0x20
+#define TMP105_CONF_R1 0x40
+#define TMP105_CONF_OS 0x80
+
+#define TMP105_I2C_ADDRESS 0x48
+
+#define MAX_TEMP 128
+#define MIN_TEMP -55
+
+/* Each client has this additional data */
+struct tmp105_data {
+ struct i2c_client *client;
+ /* mutex for sysfs operations */
+ struct mutex lock;
+ struct device *hwmon_dev;
+ s16 temp[3];
+ unsigned long last_updated;
+ u8 configuration_setting;
+};
+
+static const u8 tmp105_reg[] = {
+ TMP105_TEMP_REG,
+ TMP105_TLOW_REG,
+ TMP105_THIGH_REG,
+};
+
+static void tmp105_init_client(struct i2c_client *client);
+
+static signed long tmp105_reg_to_mC(s16 val)
+{
+ signed long temp_mC;
+ if (val & 0x800)
+ val = val - 0x1000 ;
+ temp_mC = (val * 64000) / 1024;
+ return temp_mC;
+}
+
+static u16 tmp105_C_to_reg(signed long val)
+{
+ val = (val * 1024) / 64000;
+ if (val < 0)
+ val = val + 0x1000;
+ return (u16)val;
+}
+
+static s16 *tmp105_update_device(struct i2c_client *client,
+ int index)
+{
+ struct tmp105_data *data = i2c_get_clientdata(client);
+ u8 tmp[2];
+
+ mutex_lock(&data->lock);
+
+ if (time_after(jiffies, data->last_updated + HZ/4)) {
+ i2c_smbus_read_i2c_block_data(client,
+ tmp105_reg[index], 2, tmp);
+ data->temp[index] = ((tmp[0] << 4) | ((tmp[1] & 0xF0) >> 4));
+ printk(KERN_INFO "Raw temperature: %u\n", data->temp[index]);
+ data->last_updated = jiffies;
+ }
+
+ mutex_unlock(&data->lock);
+ return data->temp[index] ;
+}
+
+static ssize_t show_temp_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ s16 temperature = tmp105_update_device(client , sda->index);
+ signed long temp_in_mC;
+
+ temp_in_mC = tmp105_reg_to_mC(temperature);
+
+ return sprintf(buf, "%d\n", temp_in_mC);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL , 0);
+
+static ssize_t tmp105_set_temp(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp105_data *tmp105 = i2c_get_clientdata(client);
+ signed long val;
+ int status = 0;
+ u16 temp;
+
+ if ((strict_strtol(buf, 10, &val) < 0))
+ return -EINVAL;
+
+ SENSORS_LIMIT(val , MIN_TEMP , MAX_TEMP);
+
+ mutex_lock(&tmp105->lock);
+
+ temp = tmp105_C_to_reg(val);
+ temp = ((temp & 0xFF0) >> 4) | ((temp & 0xF)<<12);
+
+ status = i2c_smbus_write_word_data(client, tmp105_reg[sda->index],
+ temp);
+
+ tmp105->temp[sda->index] = temp;
+ mutex_unlock(&tmp105->lock);
+ return status ? : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_value,
+ tmp105_set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_value,
+ tmp105_set_temp, 2);
+
+/* sysfs call */
+static ssize_t set_configuration(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ s32 status;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp105_data *data = i2c_get_clientdata(client);
+ data->configuration_setting = simple_strtoul(buf, NULL, 10);
+ /* I2C write to the configuration register */
+ status = i2c_smbus_write_byte_data(client, TMP105_CONF_REG,
+ data->configuration_setting);
+ return count;
+}
+
+static ssize_t show_configuration(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp105_data *data = i2c_get_clientdata(client);
+ u8 tmp;
+ i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &tmp);
+ data->configuration_setting = tmp;
+ return sprintf(buf, "%u\n", data->configuration_setting);
+}
+static DEVICE_ATTR(configuration, S_IWUSR | S_IRUGO, show_configuration,
+ set_configuration);
+
+
+static struct attribute *tmp105_attributes[] = {
+ &dev_attr_configuration.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group tmp105_attr_group = {
+ .attrs = tmp105_attributes,
+};
+
+static int tmp105_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tmp105_data *tmp105_data;
+ int err;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_dbg(&client->dev, "adapter doesn't support I2C\n");
+ return -ENODEV;
+ }
+
+ tmp105_data = kzalloc(sizeof(struct tmp105_data), GFP_KERNEL);
+ if (!tmp105_data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ tmp105_data->client = client;
+
+ i2c_set_clientdata(client, tmp105_data);
+ mutex_init(&tmp105_data->lock);
+
+ /* Initialize the TMP105 chip */
+ tmp105_init_client(client);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &tmp105_attr_group);
+ if (err)
+ goto exit_free;
+ tmp105_data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(tmp105_data->hwmon_dev)) {
+ err = PTR_ERR(tmp105_data->hwmon_dev);
+ tmp105_data->hwmon_dev = NULL;
+ goto exit_remove;
+ }
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
+exit_free:
+ i2c_set_clientdata(client, NULL);
+ kfree(tmp105_data);
+exit:
+ return err;
+}
+
+static int tmp105_remove(struct i2c_client *client)
+{
+ struct tmp105_data *tmp105 = i2c_get_clientdata(client);
+ hwmon_device_unregister(tmp105->hwmon_dev);
+
+ sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
+ i2c_set_clientdata(client, NULL);
+ kfree(tmp105);
+ return 0;
+}
+
+/* Called when we have found a new TMP105. */
+static void tmp105_init_client(struct i2c_client *client)
+{
+ struct tmp105_data *data = i2c_get_clientdata(client);
+ data->last_updated = jiffies - HZ;
+ mutex_init(&data->lock);
+}
+
+static const struct i2c_device_id tmp105_id[] = {
+ { "tmp105", 0 },
+ { }
+};
+
+#ifdef CONFIG_PM
+static int tmp105_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ u8 config_reg;
+ i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &config_reg);
+ config_reg = config_reg | TMP102_CONF_SD;
+ i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
+ return 0;
+}
+
+static int tmp105_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &config_reg);
+ config_reg = config_reg & ~TMP102_CONF_SD;
+ i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
+}
+
+static struct dev_pm_ops tmp105_dev_pm_ops = {
+ .suspend = tmp105_suspend,
+ .resume = tmp105_resume,
+};
+
+#define TMP105_DEV_PM_OPS (&tmp105_dev_pm_ops)
+#else
+#define TMP105_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+
+static struct i2c_driver tmp105_driver = {
+ .driver = {
+ .name = "tmp105",
+ .owner = THIS_MODULE,
+ .pm = TMP105_DEV_PM_OPS,
+ },
+ .probe = tmp105_probe,
+ .remove = tmp105_remove,
+ .id_table = tmp105_id,
+ .class = I2C_CLASS_HWMON,
+};
+
+static int __init tmp105_init(void)
+{
+ return i2c_add_driver(&tmp105_driver);
+}
+
+static void __exit tmp105_exit(void)
+{
+ i2c_del_driver(&tmp105_driver);
+}
+
+MODULE_DESCRIPTION("TMP105 driver");
+MODULE_LICENSE("GPL");
+
+module_init(tmp105_init);
+module_exit(tmp105_exit);
+
--
1.5.4.7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
