On 05/26/10 09:30, Hemanth V wrote:
>> From: Hemanth V <[email protected]>
>> Date: Fri, 21 May 2010 15:52:03 +0530
>> Subject: [PATCH] misc: ROHM BH1780GLI Ambient light sensor Driver
>>
>> This patch adds support for ROHM BH1780GLI Ambient light sensor.
>>
>> BH1780 supports I2C interface. Driver supports read/update of power state and
>> read of lux value (through SYSFS). Writing value 3 to power_state enables the
>> sensor and current lux value could be read.
>>
> Jonathan, Daniel
> 
> If there are no more comments, do you know howto push this to linus tree.
It's in misc, so send a copy (with reference back to review thread)
to Andrew Morton <[email protected]>

Andrew tends to pick things up eventually for lkml, but he'll notice
it quicker if you cc him in on relevant emails!

Jonathan
> 
> Thanks
> Hemanth
> 
>> Signed-off-by: Hemanth V <[email protected]>
>> Reviewed-by: Daniel Mack <[email protected]>
>> Acked-by: Jonathan Cameron <[email protected]>
>> ---
>>  drivers/misc/Kconfig     |   10 ++
>>  drivers/misc/Makefile    |    1 +
>>  drivers/misc/bh1780gli.c |  273 
>> ++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 284 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/misc/bh1780gli.c
>>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 0d0d625..3f5bf0f 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -278,6 +278,16 @@ config SENSORS_TSL2550
>>        This driver can also be built as a module.  If so, the module
>>        will be called tsl2550.
>>
>> +config SENSORS_BH1780
>> +    tristate "ROHM BH1780GLI ambient light sensor"
>> +    depends on I2C && SYSFS
>> +    help
>> +      If you say yes here you get support for the ROHM BH1780GLI
>> +      ambient light sensor.
>> +
>> +      This driver can also be built as a module.  If so, the module
>> +      will be called bh1780gli.
>> +
>>  config EP93XX_PWM
>>      tristate "EP93xx PWM support"
>>      depends on ARCH_EP93XX
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 7b6f7ee..c479d91 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
>>  obj-y                               += eeprom/
>>  obj-y                               += cb710/
>>  obj-$(CONFIG_VMWARE_BALLOON)        += vmware_balloon.o
>> +obj-$(CONFIG_SENSORS_BH1780)        += bh1780gli.o
>> diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
>> new file mode 100644
>> index 0000000..774531d
>> --- /dev/null
>> +++ b/drivers/misc/bh1780gli.c
>> @@ -0,0 +1,273 @@
>> +/*
>> + * bh1780gli.c
>> + * ROHM Ambient Light Sensor Driver
>> + *
>> + * Copyright (C) 2010 Texas Instruments
>> + * Author: Hemanth V <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published 
>> by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but 
>> WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along 
>> with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/i2c.h>
>> +#include <linux/slab.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +
>> +#define BH1780_REG_CONTROL  0x80
>> +#define BH1780_REG_PARTID   0x8A
>> +#define BH1780_REG_MANFID   0x8B
>> +#define BH1780_REG_DLOW     0x8C
>> +#define BH1780_REG_DHIGH    0x8D
>> +
>> +#define BH1780_REVMASK              (0xf)
>> +#define BH1780_POWMASK              (0x3)
>> +#define BH1780_POFF         (0x0)
>> +#define BH1780_PON          (0x3)
>> +
>> +/* power on settling time in ms */
>> +#define BH1780_PON_DELAY    2
>> +
>> +struct bh1780_data {
>> +    struct i2c_client *client;
>> +    int power_state;
>> +    /* lock for sysfs operations */
>> +    struct mutex lock;
>> +};
>> +
>> +static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char 
>> *msg)
>> +{
>> +    int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
>> +    if (ret < 0)
>> +            dev_err(&ddata->client->dev,
>> +                    "i2c_smbus_write_byte_data failed error %d\
>> +                    Register (%s)\n", ret, msg);
>> +    return ret;
>> +}
>> +
>> +static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
>> +{
>> +    int ret = i2c_smbus_read_byte_data(ddata->client, reg);
>> +    if (ret < 0)
>> +            dev_err(&ddata->client->dev,
>> +                    "i2c_smbus_read_byte_data failed error %d\
>> +                     Register (%s)\n", ret, msg);
>> +    return ret;
>> +}
>> +
>> +static ssize_t bh1780_show_lux(struct device *dev,
>> +                            struct device_attribute *attr, char *buf)
>> +{
>> +    struct platform_device *pdev = to_platform_device(dev);
>> +    struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +    int lsb, msb;
>> +
>> +    lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
>> +    if (lsb < 0)
>> +            return lsb;
>> +
>> +    msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
>> +    if (msb < 0)
>> +            return msb;
>> +
>> +    return sprintf(buf, "%d\n", (msb << 8) | lsb);
>> +}
>> +
>> +static ssize_t bh1780_show_power_state(struct device *dev,
>> +                                    struct device_attribute *attr,
>> +                                    char *buf)
>> +{
>> +    struct platform_device *pdev = to_platform_device(dev);
>> +    struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +    int state;
>> +
>> +    state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> +    if (state < 0)
>> +            return state;
>> +
>> +    return sprintf(buf, "%d\n", state & BH1780_POWMASK);
>> +}
>> +
>> +static ssize_t bh1780_store_power_state(struct device *dev,
>> +                                    struct device_attribute *attr,
>> +                                    const char *buf, size_t count)
>> +{
>> +    struct platform_device *pdev = to_platform_device(dev);
>> +    struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> +    unsigned long val;
>> +    int error;
>> +
>> +    error = strict_strtoul(buf, 0, &val);
>> +    if (error)
>> +            return error;
>> +
>> +    if (val < BH1780_POFF || val > BH1780_PON)
>> +            return -EINVAL;
>> +
>> +    mutex_lock(&ddata->lock);
>> +
>> +    error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
>> +    if (error < 0) {
>> +            mutex_unlock(&ddata->lock);
>> +            return error;
>> +    }
>> +
>> +    msleep(BH1780_PON_DELAY);
>> +    ddata->power_state = val;
>> +    mutex_unlock(&ddata->lock);
>> +
>> +    return count;
>> +}
>> +
>> +static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
>> +
>> +static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
>> +            bh1780_show_power_state, bh1780_store_power_state);
>> +
>> +static struct attribute *bh1780_attributes[] = {
>> +    &dev_attr_power_state.attr,
>> +    &dev_attr_lux.attr,
>> +    NULL
>> +};
>> +
>> +static const struct attribute_group bh1780_attr_group = {
>> +    .attrs = bh1780_attributes,
>> +};
>> +
>> +static int __devinit bh1780_probe(struct i2c_client *client,
>> +                                            const struct i2c_device_id *id)
>> +{
>> +    int ret;
>> +    struct bh1780_data *ddata = NULL;
>> +    struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>> +
>> +    if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
>> +            ret = -EIO;
>> +            goto err_op_failed;
>> +    }
>> +
>> +    ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
>> +    if (ddata == NULL) {
>> +            ret = -ENOMEM;
>> +            goto err_op_failed;
>> +    }
>> +
>> +    ddata->client = client;
>> +    i2c_set_clientdata(client, ddata);
>> +
>> +    ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
>> +    if (ret < 0)
>> +            goto err_op_failed;
>> +
>> +    dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
>> +                    (ret & BH1780_REVMASK));
>> +
>> +    mutex_init(&ddata->lock);
>> +
>> +    ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
>> +    if (ret)
>> +            goto err_op_failed;
>> +
>> +    return 0;
>> +
>> +err_op_failed:
>> +    kfree(ddata);
>> +    return ret;
>> +}
>> +
>> +static int __devexit bh1780_remove(struct i2c_client *client)
>> +{
>> +    struct bh1780_data *ddata;
>> +
>> +    ddata = i2c_get_clientdata(client);
>> +    sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
>> +    i2c_set_clientdata(client, NULL);
>> +    kfree(ddata);
>> +
>> +    return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
>> +{
>> +    struct bh1780_data *ddata;
>> +    int state, ret;
>> +
>> +    ddata = i2c_get_clientdata(client);
>> +    state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> +    if (state < 0)
>> +            return state;
>> +
>> +    ddata->power_state = state & BH1780_POWMASK;
>> +
>> +    ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
>> +                            "CONTROL");
>> +
>> +    if (ret < 0)
>> +            return ret;
>> +
>> +    return 0;
>> +}
>> +
>> +static int bh1780_resume(struct i2c_client *client)
>> +{
>> +    struct bh1780_data *ddata;
>> +    int state, ret;
>> +
>> +    ddata = i2c_get_clientdata(client);
>> +    state = ddata->power_state;
>> +
>> +    ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
>> +                            "CONTROL");
>> +
>> +    if (ret < 0)
>> +            return ret;
>> +
>> +    return 0;
>> +}
>> +#else
>> +#define bh1780_suspend NULL
>> +#define bh1780_resume NULL
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct i2c_device_id bh1780_id[] = {
>> +    { "bh1780", 0 },
>> +    { },
>> +};
>> +
>> +static struct i2c_driver bh1780_driver = {
>> +    .probe          = bh1780_probe,
>> +    .remove         = bh1780_remove,
>> +    .id_table       = bh1780_id,
>> +    .suspend        = bh1780_suspend,
>> +    .resume         = bh1780_resume,
>> +    .driver = {
>> +            .name = "bh1780"
>> +    },
>> +};
>> +
>> +static int __init bh1780_init(void)
>> +{
>> +    return i2c_add_driver(&bh1780_driver);
>> +}
>> +
>> +static void __exit bh1780_exit(void)
>> +{
>> +    i2c_del_driver(&bh1780_driver);
>> +}
>> +
>> +module_init(bh1780_init)
>> +module_exit(bh1780_exit)
>> +
>> +MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Hemanth V <[email protected]>");
>> --
>> 1.5.6.3
>>
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to