On Fri, May 28, 2010 at 10:28:04PM -0700, Cory Maccarrone wrote:
> This change adds the htc-mmc.c and htc-mmc.h files that
> contain common setup code for many OMAP850-based HTC
> smartphones. This code is a port of the code used by
> the linwizard project to support devices such as the
> HTC Wizard, HTC Herald, HTC Opal, etc.
>
> Signed-off-by: Cory Maccarrone <[email protected]>
> ---
> arch/arm/mach-omap1/htc-mmc.c | 104
> +++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap1/htc-mmc.h | 26 ++++++++++
> 2 files changed, 130 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap1/htc-mmc.c
> create mode 100644 arch/arm/mach-omap1/htc-mmc.h
>
> diff --git a/arch/arm/mach-omap1/htc-mmc.c b/arch/arm/mach-omap1/htc-mmc.c
> new file mode 100644
> index 0000000..4fa8bb4
> --- /dev/null
> +++ b/arch/arm/mach-omap1/htc-mmc.c
> @@ -0,0 +1,104 @@
> +/*
> + * linux/arch/arm/mach-omap1/htc-mmc.c
> + *
> + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
> + * Author: Felipe Balbi <[email protected]>
> + *
> + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which
> is:
> + * Copyright (C) 2006 Nokia Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <plat/mmc.h>
> +#include <asm/mach-types.h>
> +
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +
> +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
> +
> +#define OMAP_MMC_REG_SYSC (0xfffb7800 + 0x32)
> +#define OMAP_MMC_REG_SYSS (0xfffb7800 + 0x34)
Where are these used?
> +static int slot_cover_open;
> +static struct device *mmc_device;
> +
> +static int htc_mmc_set_power(struct device *dev, int slot, int power_on,
> + int vdd)
> +{
> +#ifdef CONFIG_MMC_DEBUG
> + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
> + power_on ? "on" : "off", vdd);
> +#endif
> + if (slot != 0) {
> + dev_err(dev, "No such slot %d\n", slot + 1);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
No-op?
> +static int htc_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
> +{
> +#ifdef CONFIG_MMC_DEBUG
> + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
> + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
> +#endif
> + if (slot != 0) {
> + dev_err(dev, "No such slot %d\n", slot + 1);
> + return -ENODEV;
> + }
> +
> + /* Treated on upper level */
> +
> + return bus_mode;
> +}
> +
> +static int htc_mmc_get_cover_state(struct device *dev, int slot)
> +{
> + BUG_ON(slot != 0);
> + return slot_cover_open;
> +}
Just a complicated way to return zero...
> +static int htc_mmc_late_init(struct device *dev)
> +{
> + mmc_device = dev;
> + return 0;
> +}
What is this good for?
> +static void htc_mmc_cleanup(struct device *dev)
> +{
> +}
> +
> +static struct omap_mmc_platform_data htc_mmc1_data = {
> + .nr_slots = 1,
> + .switch_slot = NULL,
> + .init = htc_mmc_late_init,
> + .cleanup = htc_mmc_cleanup,
> + .slots[0] = {
> + .set_power = htc_mmc_set_power,
> + .set_bus_mode = htc_mmc_set_bus_mode,
> + .get_ro = NULL,
> + .get_cover_state = htc_mmc_get_cover_state,
> + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
> + MMC_VDD_32_33 | MMC_VDD_33_34,
> + .name = "mmcblk",
> + .nomux = 1,
> + .wires = 4,
> + .switch_pin = -1,
> + },
> +};
To me above seems completely no-op, so it could be simplified this way:
static struct omap_mmc_platform_data htc_mmc1_data = {
.nr_slots = 1,
.switch_slot = NULL,
.slots[0] = {
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
.nomux = 1,
.wires = 4,
.switch_pin = -1,
},
};
Now, once this file contains only one structure definition, is it worth
to let it exist at all? What about adding it to board-htcherald.c instead?
> +
> +static struct omap_mmc_platform_data *htc_mmc_data[1];
> +
> +void __init htc_mmc_init(void)
> +{
> + /* register it */
> + htc_mmc_data[0] = &htc_mmc1_data;
> + omap1_init_mmc(htc_mmc_data, 1);
> +}
> +#endif
> +
> diff --git a/arch/arm/mach-omap1/htc-mmc.h b/arch/arm/mach-omap1/htc-mmc.h
> new file mode 100644
> index 0000000..480de14
> --- /dev/null
> +++ b/arch/arm/mach-omap1/htc-mmc.h
> @@ -0,0 +1,26 @@
> +/*
> + * linux/arch/arm/mach-omap1/htc-mmc.h
> + *
> + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
> + * Author: Felipe Balbi <[email protected]>
> + *
> + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which
> is:
> + * Copyright (C) 2006 Nokia Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __HTC_MMC_H
> +#define __HTC_MMC_H
> +
> +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
> +extern void htc_mmc_init(void);
> +#else
> +static inline void htc_mmc_init(void)
> +{
> +}
> +#endif
> +
> +#endif /* __HTC_MMC_H */
> +
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
