> -----Original Message-----
> From: [email protected] [mailto:linux-fbdev-
> [email protected]] On Behalf Of Nagarajan, Rajkumar
> Sent: Saturday, June 26, 2010 4:40 PM
> To: [email protected]
> Cc: [email protected]; [email protected]
> Subject: [PATCH] OMAP:DSS: Enable TV Detection support
>
>
> Enabled TVDET and created a sysfs entry for TV Detection
>
> To detect if tv set is connected run this command
> cat /sys/devices/platform/omapdss/display1/device_state
> 1: TV set connected
> 0: TV set disconnected
>
> Signed-off-by: Axel Castaneda Gonzalez <[email protected]>
> Signed-off-by: Kishore Y <[email protected]>
> Signed-off-by: Mukund Mittal <[email protected]>
> Signed-off-by: Rajkumar N <[email protected]>
> ---
> arch/arm/plat-omap/include/plat/display.h | 2 +
> drivers/video/omap2/dss/display.c | 23 +++++++++++++
> drivers/video/omap2/dss/venc.c | 52
> +++++++++++++++++++++++++++++
> 3 files changed, 77 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-
> omap/include/plat/display.h
> index 7842efa..522240b 100644
> --- a/arch/arm/plat-omap/include/plat/display.h
> +++ b/arch/arm/plat-omap/include/plat/display.h
> @@ -464,6 +464,8 @@ struct omap_dss_device {
>
> enum omap_dss_display_state state;
>
> + u32 (*get_device_state)(struct omap_dss_device *dssdev);
> +
> /* platform specific */
> int (*platform_enable)(struct omap_dss_device *dssdev);
> void (*platform_disable)(struct omap_dss_device *dssdev);
> diff --git a/drivers/video/omap2/dss/display.c
> b/drivers/video/omap2/dss/display.c
> index ef8c852..2b937fe 100644
> --- a/drivers/video/omap2/dss/display.c
> +++ b/drivers/video/omap2/dss/display.c
> @@ -278,6 +278,26 @@ static ssize_t display_wss_store(struct device *dev,
> return size;
> }
>
> +static ssize_t device_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct omap_dss_device *dssdev = to_dss_device(dev);
> + unsigned int device_state;
> +
> + if (!dssdev->get_device_state)
> + return -ENOENT;
> +
> + device_state = dssdev->get_device_state(dssdev);
> +
> + return snprintf(buf, PAGE_SIZE, "%u\n", device_state);
> +}
> +
> +static ssize_t device_state_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + return size;
> +}
[Hiremath, Vaibhav] Can we make this entry READONLY? I think then we can get
rid of write function all together, right?
> +
> static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR,
> display_enabled_show, display_enabled_store);
> static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR,
> @@ -290,6 +310,8 @@ static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR,
> display_rotate_show, display_rotate_store);
> static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR,
> display_mirror_show, display_mirror_store);
> +static DEVICE_ATTR(device_state, S_IRUGO|S_IWUSR,
> + device_state_show, device_state_store);
> static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR,
> display_wss_show, display_wss_store);
>
> @@ -301,6 +323,7 @@ static struct device_attribute *display_sysfs_attrs[] =
> {
> &dev_attr_rotate,
> &dev_attr_mirror,
> &dev_attr_wss,
> + &dev_attr_device_state,
> NULL
> };
>
> diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
> index eff3505..3b5093b 100644
> --- a/drivers/video/omap2/dss/venc.c
> +++ b/drivers/video/omap2/dss/venc.c
> @@ -33,12 +33,15 @@
> #include <linux/seq_file.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/gpio.h>
>
> #include <plat/display.h>
> #include <plat/cpu.h>
>
> #include "dss.h"
>
> +#define TV_INT_GPIO 33
> +#define TV_DETECT_DELAY 40 /*Delay for TV detection
> logic*/
> #define VENC_BASE 0x48050C00
>
> /* Venc registers */
> @@ -612,6 +615,46 @@ static int venc_set_wss(struct omap_dss_device *dssdev,
> u32 wss)
> return 0;
> }
>
> +/**
> + * Enables TVDET pulse generation
> + */
> +static void venc_enable_tv_detect(void)
> +{
> + u32 l;
> +
> + l = venc_read_reg(VENC_GEN_CTRL);
> + /* TVDET Active High Setting */
> + l |= FLD_VAL(1, 16, 16);
> + /* Enable TVDET pulse generation */
> + l |= FLD_VAL(1, 0, 0);
> + venc_write_reg(VENC_GEN_CTRL, l);
> +}
> +
> +/**
> + * Disables TVDET pulse generation
> + */
> +static void venc_disable_tv_detect(void)
> +{
> + u32 l;
> +
> + /* Disable TVDET pulse generation */
> + l = venc_read_reg(VENC_GEN_CTRL);
> + l |= FLD_VAL(0, 0, 0);
> + venc_write_reg(VENC_GEN_CTRL, l);
> +}
> +
[Hiremath, Vaibhav] We can have only one function, something like,
static void venc_tv_detect(int/bool enable)
{
u32 l;
l = venc_read_reg(VENC_GEN_CTRL);
if (enable) {
/* TVDET Active High Setting */
l |= FLD_VAL(1, 16, 16);
/* Enable TVDET pulse generation */
l |= FLD_VAL(1, 0, 0);
} else {
/* Disable TVDET pulse generation */
l |= FLD_VAL(0, 0, 0);
}
venc_write_reg(VENC_GEN_CTRL, l);
}
> +static u32 venc_detect_device(struct omap_dss_device *dssdev)
> +{
> + u32 tv_state;
> +
> + venc_enable_tv_detect();
> + mdelay(TV_DETECT_DELAY);
> + tv_state = gpio_get_value(TV_INT_GPIO);
> + venc_disable_tv_detect();
> +
[Hiremath, Vaibhav] You need to pass either 0/1 here if you implement above
method.
Thanks,
Vaibhav
> + return tv_state;
> +}
> +
> static struct omap_dss_driver venc_driver = {
> .probe = venc_panel_probe,
> .remove = venc_panel_remove,
> @@ -646,6 +689,7 @@ static struct omap_dss_driver venc_driver = {
> int venc_init(struct platform_device *pdev)
> {
> u8 rev_id;
> + int ret;
>
> mutex_init(&venc.venc_lock);
>
> @@ -671,7 +715,14 @@ int venc_init(struct platform_device *pdev)
>
> venc_enable_clocks(0);
>
> + ret = gpio_request(TV_INT_GPIO, "tv_detect");
> + if (ret)
> + pr_err("Failed to get TV_INT_GPIO gpio_33.\n");
> + else
> + gpio_direction_input(TV_INT_GPIO);
> +
> return omap_dss_register_driver(&venc_driver);
> +
> }
>
> void venc_exit(void)
> @@ -684,6 +735,7 @@ void venc_exit(void)
> int venc_init_display(struct omap_dss_device *dssdev)
> {
> DSSDBG("init_display\n");
> + dssdev->get_device_state = venc_detect_device;
>
> return 0;
> }
> --
> 1.5.4.3
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
