Hi Vishwa,
> -----Original Message-----
> From: [email protected] [mailto:linux-omap-
> [email protected]] On Behalf Of Sripathy, Vishwanath
> Sent: Tuesday, June 29, 2010 9:15 AM
> To: [email protected]
> Subject: RE: Boot fail on OMAP3430SDP
>
> Here is the log from Early printk.
>
<snip>
> Could not get gpios_ick
> Could not get gpios_fck
Probably Tony will be the best to answer this, but... This code shouldn't get
executed I think (the one producing above prints)..
Above clocks are declared for omap2 only (in
arch/arm/mach-omap2/clock24[20,30]_data.c), and even this clk_get calls are
inside of a supposedly omap2 only execution in arch/arm/plat-omap/gpio.c:
static int __init _omap_gpio_init(void)
{
...
...
#if defined(CONFIG_ARCH_OMAP2)
if (cpu_class_is_omap2()) {
gpio_ick = clk_get(NULL, "gpios_ick");
if (IS_ERR(gpio_ick))
printk("Could not get gpios_ick\n");
else
clk_enable(gpio_ick);
gpio_fck = clk_get(NULL, "gpios_fck");
if (IS_ERR(gpio_fck))
printk("Could not get gpios_fck\n");
else
clk_enable(gpio_fck);
/*
* On 2430 & 3430 GPIO 5 uses CORE L4 ICLK
*/
#if defined(CONFIG_ARCH_OMAP2430)
if (cpu_is_omap2430()) {
gpio5_ick = clk_get(NULL, "gpio5_ick");
if (IS_ERR(gpio5_ick))
printk("Could not get gpio5_ick\n");
else
clk_enable(gpio5_ick);
gpio5_fck = clk_get(NULL, "gpio5_fck");
if (IS_ERR(gpio5_fck))
printk("Could not get gpio5_fck\n");
else
clk_enable(gpio5_fck);
}
#endif
}
#endif
...
}
So, I guess your board is trying to get initialized as omap2 somehow...
Regards,
Sergio
<snip>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
