* Kan-Ru Chen <[email protected]> [100705 09:27]:
> The devkit8000 debug boards often come with empty EEPROM thus without
> valid ethernet MAC address. The DIE id to MAC formula is copied from
> u-boot.
>
> Signed-off-by: Kan-Ru Chen <[email protected]>
> ---
> arch/arm/mach-omap2/board-devkit8000.c | 17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c
> b/arch/arm/mach-omap2/board-devkit8000.c
> index a2a8afe..807ceee 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -45,6 +45,7 @@
> #include <plat/usb.h>
> #include <plat/timer-gp.h>
> #include <plat/display.h>
> +#include <plat/io.h>
>
> #include <plat/mcspi.h>
> #include <linux/input/matrix_keypad.h>
> @@ -66,6 +67,10 @@
> #define OMAP_DM9000_GPIO_IRQ 25
> #define OMAP3_DEVKIT_TS_GPIO 27
>
> +#define DIE_ID_REG_BASE (L4_34XX_PHYS + 0xA000)
> +#define DIE_ID_REG_0 0x218
> +#define DIE_ID_REG_1 0x21C
> +
> struct flash_partitions {
> struct mtd_partition *parts;
> int nr_parts;
> @@ -603,6 +608,9 @@ static struct platform_device omap_dm9000_dev = {
>
> static void __init omap_dm9000_init(void)
> {
> + unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
> + unsigned int die_id_0;
> +
> if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
> printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
> OMAP_DM9000_GPIO_IRQ);
> @@ -610,6 +618,15 @@ static void __init omap_dm9000_init(void)
> }
>
> gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
> +
> + /* init the mac address using DIE id */
> + die_id_0 = omap_readl(DIE_ID_REG_BASE + DIE_ID_REG_0);
We should not add omap_readl/writel to any new code, those are slowly
going away.
> + eth_addr[0] = 0x02; /* locally administered */
> + eth_addr[1] = omap_readl(DIE_ID_REG_BASE + DIE_ID_REG_1) & 0xff;
> + eth_addr[2] = (die_id_0 & 0xff000000) >> 24;
> + eth_addr[3] = (die_id_0 & 0x00ff0000) >> 16;
> + eth_addr[4] = (die_id_0 & 0x0000ff00) >> 8;
> + eth_addr[5] = (die_id_0 & 0x000000ff);
> }
>
> static struct platform_device *devkit8000_devices[] __initdata = {
How about adding a function for getting this from mach-omap2/id.c?
Other boards might want to use it too.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
