This adds S-Video DSS and VDAC regulator platform definitions to the IGEPv2 board. There isn't a physical connector on-board but one can solder one at test points provided by ISEE.
Signed-off-by: Maurus Cuelenaere <[email protected]> --- arch/arm/mach-omap2/board-igep0020.c | 31 +++++++++++++++++++++++++++++-- 1 files changed, 29 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d55c57b..3ec48bd 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -310,8 +310,16 @@ static struct omap_dss_device igep2_dvi_device = { .platform_disable = igep2_disable_dvi, }; +static struct omap_dss_device igep2_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + static struct omap_dss_device *igep2_dss_devices[] = { - &igep2_dvi_device + &igep2_dvi_device, + &igep2_tv_device, }; static struct omap_dss_board_info igep2_dss_data = { @@ -328,6 +336,25 @@ static struct platform_device igep2_dss_device = { }, }; +static struct regulator_consumer_supply igep2_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &igep2_dss_device.dev, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data igep2_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep2_vdda_dac_supply, +}; + static struct regulator_consumer_supply igep2_vpll2_supply = { .supply = "vdds_dsi", .dev = &igep2_dss_device.dev, @@ -429,7 +456,7 @@ static struct twl4030_platform_data igep2_twldata = { .vmmc1 = &igep2_vmmc1, .vmmc2 = &igep2_vmmc2, .vpll2 = &igep2_vpll2, - + .vdac = &igep2_vdac, }; static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = { -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
